Awning pole hold down kit

[B and B]

I figured you were home OC. The forum has not been the same place with the lack of your insight, professionalism, knowledge and annoying Turbs

[Witch Doctor]

Originally Posted by OldCoot

Got the 20 outer tube pads cut, de-burred and ready to weld and the positioning fixture made, outer tubes de-burred on both ends. Will de-burr the 20 inner tubes tomorrow, layout, drill and chamfer the 28 holes in each pole. Will wait until better weather to take the pads over to Butlerbuilt to get them welded.

well you didn't waist any time did you. It's snowing here, first time this year 19 degrees. Getting tired of WINTER. You still have 10 sets of brackets or do you have to make them to?

[B and B]

Originally Posted by gljurczyk

well you didn't waist any time did you. It's snowing here, first time this year 19 degrees. Getting tired of WINTER. You still have 10 sets of brackets or do you have to make them to?

First time snowing.. We have 4 feet Glen. Broke the all time temp record last night, coldest ever at -35 C.

I bet OC was missing the shop being south all winter!!

[elind]

Originally Posted by B and B

I figured you were home OC. The forum has not been the same place with the lack of your insight, professionalism, knowledge and annoying Turbs

I seen the Nashville Father/Son Love has started for the season.

[TURBS]

Originally Posted by elind

I seen the Nashville Father/Son Love has started for the season.

I think when "Phil" sees his shadow "and he did" oc should stay in florida for 6 more weeks.........

[OldCoot]

Originally Posted by gljurczyk

well you didn't waste any time did you? It's snowing here, first time this year 19 degrees. Getting tired of WINTER. You still have 10 sets of brackets or do you have to make them to?

Have brackets for the 10 sets and a few bracket kits left over. Also have enough material left to make 25 more sets of brackets.

[OldCoot]

9 sets of brackets left for those that don't get a set of the 10 awning poles.

[OldCoot]

After threatening TOWTA, she finally got motivated and got the 640 holes laid out, center punched, drilled, chamfered and de-burred. So all that is left to do is get the outer pole pads welded and riveted on. If I'm lucky, she should finish the 10 sets by the weekend.

[TURBS]

Originally Posted by OldCoot

After threating TOWTA, she finally got motivated and got the 640 holes laid out, center punched, drilled, chamfered and de-burred. So all that is left to do is get the outer pole pads welded and riveted on. If I'm lucky, she should finish the 10 sets by the weekend.

Ship me a set when your done would ya.
Send timmy a set to.

[OldCoot]

Originally Posted by TURBS

Ship me a set when your done would ya.
Send timmy a set to.

You know that will happen just as soon as a thin layer of ice forms in H***!

[TURBS]

Originally Posted by OldCoot

You know that will happen just as soon as a thin layer of ice forms in H***!

You have my address, I'll pay you later.

[Kaadk]

Originally Posted by OldCoot

You know that will happen just as soon as a thin layer of ice forms in H***!

http://m.accuweather.com/en/us/hell-...recast/2211114

Seems pretty frozen there today. When do you start shipping?

Serious though, are you getting any to the Goshen rally? (Brackets or full pole kits). I know someone who's still dragging their feet in deciding, but if you have some there he might finally decide to do an impulse buy.



Sent from my iPhone using Forest River Forums

[TURBS]

Originally Posted by Kaadk

http://m.accuweather.com/en/us/hell-...recast/2211114

Seems pretty frozen there today. When do you start shipping?

Serious though, are you getting any to the Goshen rally? (Brackets or full pole kits). I know someone who's still dragging their feet in deciding, but if you have some there he might finally decide to do an impulse buy.



Sent from my iPhone using Forest River Forums

Negative -35 with wind chill tomorrow here! Sounds like hell to me!
Next day air will be fine oc

TURBS

[youroo]

Originally Posted by OldCoot

You know that will happen just as soon as a thin layer of ice forms in H***!

It seems like this company Marketing Dept.needs some (Sensitivity Training)! Very Harsh replys to (Potential Customers)! Youroo!!

[OldCoot]

Originally Posted by Kaadk

[URL]Seems pretty frozen there today. When do you start shipping? Serious though, are you getting any to the Goshen rally? (Brackets or full pole kits). I know someone who's still dragging their feet in deciding, but if you have some there he might finally decide to do an impulse buy.

We will not be going to the Goshen rally, just the Nashville rally. I do have 9 bracket kits left. As of right now, I will be taking one set of poles to N'ville for Indymule and will have 9 sets of poles ready by Sat for pickup in Concord, NC.

[Mojojojo]

Originally Posted by OldCoot

We will not be going to the Goshen rally, just the Nashville rally. I do have 9 bracket kits left. As of right now, I will be taking one set of poles to N'ville for Indymule and will have 9 sets of poles ready by Sat for pickup in Concord, NC.

Rumor has it your not shipping

[OldCoot]

Originally Posted by Mojojojo

Rumor has it your not shipping

I think that would be a true statement/rumor.

[Kaadk]

Originally Posted by OldCoot

We will not be going to the Goshen rally, just the Nashville rally. I do have 9 bracket kits left. As of right now, I will be taking one set of poles to N'ville for Indymule and will have 9 sets of poles ready by Sat for pickup in Concord, NC.

Yeah, I thought I remembered you saying you wouldn't be able to go. (But then again, we heard the same last year.) I just hoped you might have lined up a distributor to do the wheeling and dealing for ya.

Oh well.




Sent from my iPhone using Forest River Forums

[mike618]

Old Coot, I want a set and will pick them up

[OldCoot]

Originally Posted by mike618

Old Coot, I want a set and will pick them up

Should be able to pick them up this weekend. Outer pole pads are being welded this afternoon and I'll have them installed either tonight or tomorrow morning.