Is there an adapter to use on the kitchen sink so I can hook up a hose when the camper is in my truck? The drain lines up perfectly with the bed rail and there is zero clearance. I do take the cap off before loading since I can't take it off when it is loaded.
Went to Colon, Michigan Friday to the Palomino factory. Took an awesome tour. They relocated the drain for me. Awesome bunch of people. Thanks for the help.
I had the same problem with my Palomino, I made a frame out of 2 X 4 to fit between the Camper and my truck bed, then set the Camper on top of the new "Spacer", this gave me enough clearance to connect a hose to the drain. Have not any problems with this arrangement. (The 2x4 's are laying on their flat side not on the edges). Hope this helps.
Duvie, thanks. I actually have mine sitting on 2 X 4's as well. If I didn't have it on the boards it actually hit the top rail. They actually drilled a new hole and mounted a new connector and hooked the sink drain to it while I was there.
Linear Mode
