2006 Surveyor 303 Floor Replacement

[ramit315]

Hey guys I have to replace a small section of floor on my 2006 Forest River Surveyor 303 it toward the back in front of the frig and was wonder what size the plywood is and what a good replacement would be. Any other info on doing this would be great.

[sherdep]

Welcome to the Forum
Is the floor soft from getting wet?
You may get diffrent opinions on this -

If it is a moisture issue I would suggest either Marine Plywood or pressure treated with some sort of water seal - not sure of the size you need

Can you take a picture of the area you are trying to replace - you may need to remove some stuff around it so you can get larger area to secure the new piece you are replacing

[Bama Rambler]

I'm not sure they're the same but our Grand Surveyor uses 1/2" plywood flooring. It's actually not 1/2" it's really 15/32" but it's standard trade size so close enough. You're probably going to need to shore up around the edges where you cut the patch out but that's easy to do.

[ramit315]

Thanks guys. I had a leak in the bathroom under the sink that made the soft spot. I will try next week to get to replaceing the floor.