2008 XLR 38x12
We purchased this unit in March of 2010 used very little, plastic still on stairs and furniture,back area never used . From a private seller, added awning toppers , max air vents , and a few goodies . Replaced all outside slide gaskets , they were falling off.
We love the unit , the colors and fit and finish.It serves us well with the garage used as a bed room for our two teenagers when the toys are not in there. We have pulled it about 6000 miles so far and upon a return home when backing up the last axel wheel fell off , found out the bearings let go , ruined the spindel and had to have another one welded on , serviced the whole rigs axels and away we went again with a cost of $1600.00. I have always checked the tire pressures and grease cups on each axel.The rear tire on the entry door side has a clearance of about 1/2 to 5/8 inch and all other tires have about 1.5 to 2 inches of clearance.It that right , seems the clearance should be more , had all wheels checked and alignment seems ok .Wondering if anyone has had this happen or knows of this, Also the graphics are now starting to peal and crumble on the edges in a few spots.Would like to get the graphics fixed before it looks bad.
2011 F350 CC LB Lariet dually
2008 XLR 38X12