|
10-28-2011, 09:27 PM
|
#1
|
Member
Join Date: Oct 2011
Location: Corinth , Texas
Posts: 95
|
Bathroom door
Arrived at CG and bathroom door won't latch closed. The little door thing that goes in door frame hole seems to have moved bout 1/4" up. How do I fix this? Or do I put on list for warranty work this is our 1 at real trip interstate and everything ! Lol
|
|
|
10-28-2011, 09:40 PM
|
#2
|
Junior Member
Join Date: Oct 2011
Posts: 11
|
Many times this will happen if you are not perfectly level.
__________________
2012 Surveyor SP280
2005 Nissan Titan
|
|
|
10-28-2011, 09:41 PM
|
#3
|
Senior Member
Join Date: Dec 2007
Location: Eastern Oklahoma, USA
Posts: 2,618
|
First, check to see if you have leveled the tt properly. If the tt is twisted it could keep the door shutting.
|
|
|
10-28-2011, 09:49 PM
|
#4
|
Member
Join Date: Oct 2011
Location: Corinth , Texas
Posts: 95
|
Can I just pull up stabilizers and pull up onto level pads to raise slide side bout 1"
Or do I need to bring slides in
|
|
|
10-28-2011, 09:50 PM
|
#5
|
Senior Member
Join Date: Dec 2007
Location: Eastern Oklahoma, USA
Posts: 2,618
|
Quote:
Originally Posted by Vols
Can I just pull up stabilizers and pull up onto level pads to raise slide side bout 1"
Or do I need to bring slides in
|
That should be okay. Just check to make sure nothing is in the way of the slides.
Before you do that, raise the stabilizers and check the door. You may have the front or rear raised too high with the stabilizers.
|
|
|
10-29-2011, 10:22 AM
|
#6
|
Lottery Non-Winner
Join Date: Jul 2011
Posts: 437
|
Just as a TTP, I never move with slides out. Not even a little.
__________________
2011 Georgetown 337
2009 HD FLHTCU
2007 HD FXSTC
|
|
|
10-29-2011, 10:31 AM
|
#7
|
Senior Member
Join Date: Dec 2007
Location: Eastern Oklahoma, USA
Posts: 2,618
|
Quote:
Originally Posted by Ovair
Just as a TTP, I never move with slides out. Not even a little.
|
On second thought......
I have seen it done without any problems, but I've never done it myself. Since all it takes is a simple push of a button to run in the slides, why run the risk?
I think I have to agree with Ovair on this.
|
|
|
10-29-2011, 11:01 AM
|
#8
|
Phat Phrog Stunt Team
Join Date: Aug 2011
Location: Iowa
Posts: 34,507
|
A good tip I learned years ago ....... shut all doors when travelling
|
|
|
10-29-2011, 11:10 AM
|
#9
|
Senior Member
Join Date: Oct 2011
Location: Rouleau, Saskatchewan
Posts: 180
|
I helped a friend back his trailer into his camping spot. Once we got it in where he was happy I asked him if we should level it as it was noticably higher on 1 side. His response was "thats what the leveling jack are for". When he was done the side door was rubbing on the frame and was binding when he tried to open and close the door. It looked like to me that in the process of leveling the trailer that he had twisted the frame. This was a brand new StarCraft trailer about 26 feet long.
I would do what was already mentioned earlier, raise the jacks and then check the door for alignment. Then lower jacks again paying attention to the bathroom door. It is possible that things may have move abit and the door plate may have to be readjusted. I also would not move the trailer with the slides out, even for a few feet. It takes less than a minute to move them in.
__________________
Todd & Sheila and kids
Rouleau, Saskatchewan
2012 Surveyor SV-305
2012 Dodge Ram 1500 4X4 CC Outdoorsman
|
|
|
10-29-2011, 01:37 PM
|
#10
|
Senior Member
Join Date: Jan 2011
Location: Saint Cloud FL
Posts: 1,565
|
I would not move it with the slide out like stated above - once the slide moves out of aligment - it will not be a good thing
check to see if the screws for the door hinge came loose - this will also cause the door to come out of aligment as well
__________________
2011 Rockwood Mini Lite 2306 - Matt
2004 Dodge Ram 1500 Qaud Cab 4x4 with 35" tires and 3.92 gears, Dynatech Longtube Headers & Fabtech 6" lift + Superchips with shift Tuning
Nights Camped 2011 (37) - 2012 (16)-2013 (2) -2014 (5) -2015(0)
USMC 91 - 95 - F/A-18 Aviation Ordnance
|
|
|
10-29-2011, 07:28 PM
|
#11
|
Member
Join Date: Oct 2011
Location: Corinth , Texas
Posts: 95
|
All good!
Drooped front and perfect door closes. I panicked . All good and thanks for your help
|
|
|
10-30-2011, 08:43 AM
|
#12
|
Senior Member
Join Date: Jan 2011
Location: Saint Cloud FL
Posts: 1,565
|
glad to hear all is well and it was really nothing major
__________________
2011 Rockwood Mini Lite 2306 - Matt
2004 Dodge Ram 1500 Qaud Cab 4x4 with 35" tires and 3.92 gears, Dynatech Longtube Headers & Fabtech 6" lift + Superchips with shift Tuning
Nights Camped 2011 (37) - 2012 (16)-2013 (2) -2014 (5) -2015(0)
USMC 91 - 95 - F/A-18 Aviation Ordnance
|
|
|
10-30-2011, 10:33 AM
|
#13
|
Site Team - Lou
Join Date: Oct 2009
Location: South Eastern PA
Posts: 23,268
|
So much for "that is what leveling jacks are for"
__________________
Lou & Freya the wonder dog
2008 GMC Sierra 3000HD Allison Duramax
2019 Flagstaff 8529FL
|
|
|
10-30-2011, 10:38 AM
|
#14
|
Senior Member
Join Date: Oct 2011
Location: Rouleau, Saskatchewan
Posts: 180
|
I suggested that he put blocks under the wheels but he was totally against it. When the side door was binding it didn't seem to bother him at all. If this was my new unit, I would have investigated to why it was doing this. But it was his problem and he was uninterested in solving it.
__________________
Todd & Sheila and kids
Rouleau, Saskatchewan
2012 Surveyor SV-305
2012 Dodge Ram 1500 4X4 CC Outdoorsman
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|