I have a 07 Sandpiper 305F 5er, just did the Brakes BUT ( as the wife would say) I messed up the wiring on the First one I did (wouldnt you know) Ya live and you learn lol, anyway Does anyone have a wiring diagram for wiring the Brakes ??? I'm 99.9% sure the other 3 are done right, even repacked the bearings, but the first one I did (the left front) I'm not sure LOL so HELp if you have a wiring chart
Above is a picture of the plug wiring, but I am assuming you are talking about the wiring to the magnets. It doesn't matter, one wire goes to ground, the other goes to the brake wire feeding the axle. It makes an "electromagnet" and polarity doesn't really matter. At least that is my two cents.
As Windrider said, polarity of the magnet leads doesn't matter, so the only way to mess it up is to either not hook up one or both of the wires or to hook them to the wrong circuit (i.e. the lights instead of the brakes).
__________________
Salem 29RKSS Pushing a GMC Sierra 2500HD!
Gotta go campin!
or be like me, and Cut all the wrong wires LOL, But thanks Gents, I got it back right, I didnt know eather wire could go to the magnets, all in all, Its a easy job to do, and I cleaned and Repacked the Bearings right away, took me 2 days all in all to get 4 done RIGHT LOL
Linear Mode
