holding tank locations for Windjammer 3008w?

[rhyno76]

Does anyone out there happen to know where the holding tanks are located on a 2012 Rockwood Windjammer 3008w? I figure the black and rear gray are over the axles and the galley is inline and next to the front dump valve but I'd like to know for sure before I start pulling panels, stripping screws and all that fun stuff.

If someone could pass this info along, I'd really appreciate it. I'm wanting to replace the gauges on the gray tanks, and black tank with Horst probes, and want to try to keep the underbelly access guessing to a minimum since I'll probably hit other maddening roadblocks I have yet to imagine with this project.

[cheatham09]

I ha e a 2013 same model camper. Why are you changing out the probes?

[rhyno76]

Originally Posted by cheatham09

I ha e a 2013 same model camper. Why are you changing out the probes?

This is our 3rd season with this camper and as expected, the standard probes have gummed up with residue to the point where we can't determine the levels at all. Since we camp for 10-15 days at a time, we need something that will tell us for sure when we need to get the honey wagon out.

[kairchuan]

I would call Rockwood Customer Service. They have the drawings/design to locate them for you...