Shurflow Revolution 4008 rapid cycling problem
I have a 2012 Rockwood Windjammer 3008 and the water pump seems to cycle frequently (as in non-stop off\on\off\on\off\on) when using the shower or kitchen sink, but runs continuously when flushing the toilet or using the bathroom sink. The constant cycling results in a pulsating flow at the tap. Is this common or should I get in there and adjust the bypass and\or shutoff screws?
Notes:
Shower and kitchen sink are both further from the pump. The toilet and bathroom sink are relatively close to the pump. Also, Shurflo touts the 4008 as a pump that should not need an accumulator, and there's not really much room to mount\plumb one. I'd rather figure out whether this is just common (I should just deal with it) or if I should start monkeying around with the settings.
Thanks!
__________________
Ryan & Cortney
2012 Windjammer 3008w
|