Thread Tools Display Modes
Old 03-19-2012, 07:12 PM   #1
Junior Member
Join Date: Mar 2012
Posts: 4
U-shape dinette in 2012 rockwood 2901ss

Does anyone know how to setup the U-shape dinette into a bed on 2012 Rockwood 2901ss?

There are three seat cushion, two same lenth and one shorter. With the table down these do not cover the entire area.

There are also three back cushions and two corner peices. But the back cushions are at a thicker than the seat cushion therefore you can lay them down evenly.

In our older Rockwood with bench dinette all four cushions seat and back where the same thickness and filled the entire bed space.

TexasRockwood is offline   Reply With Quote
Old 03-19-2012, 07:36 PM   #2
Phat Phrog Stunt Team
TURBS's Avatar
Join Date: Aug 2011
Location: Iowa
Posts: 34,423
I seem to remember a post like this a few months back ?

by the way welcome to the forum !

TURBS is offline   Reply With Quote
Old 03-23-2012, 05:55 PM   #3
boubou's Avatar
Join Date: Aug 2011
Location: Kingston
Posts: 725
We have a U-shaped dinnette and had the same question until we started looking around the trailer. We found the extra cushion in the bedroom closet. It's a plain cushion with no fabric on it just for that purpose.
Maybe your's is hiding somewhere as well?
2013 Jayco Eagle HT 23.5
2010 Ram 1500 HEMI with integrated brake controller, tow mirrors and Michelins LTX/AT2 275/65R20 max load: 3750 lbs. @ 80 psi but we keep them 50-55 psi
Superglide 2700
boubou is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Featured Campgrounds

Reviews provided by is not in any way associated with Forest River, Inc. or its associated RV manufacturing divisions.

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 04:54 AM.