Underbelly barrier waterproofing
As part of my 261T Floor replacement project (see separate thread in Repair section), I used some Eternabond tape to seal any decent size hole in the black water barrier/membrane. Any hole larger than 1mm is already sealed. But I also noticed a lot of road-rash type of damage. Not really holes, but likely enough to let moisture in, which could get trapped.
I don't want to attempt replacing large sections of that membrane, nor do I really want to get into installing that Coroplast stuff.
Does anyone know of some sort of spray-on sealer that would seal up little pin-holes like this? Would several cans of Krylon do the trick?
__________________
thebrakeman ('70), DW ('71), DD ('99), DD ('01), DD ('05)
2004 Surveyor SV261T (UltraLite Bunkhouse Hybrid)
2006 Mercury Mountaineer V8 AWD Premier
Equal-i-zer WDH (10k), Prodigy Brake Controller
|