Using Tornado - first time question ?

[miatared]

I have used my Tornado black tank rinser for the first time today - sprays well and cleans well.

When I turned the tap off, some water dripped from the Tornado itself, is this normal or did I forget a washer or something ? I do use the extension clear tube/hose, screwed right next to the black tank valve. But the water sputtered at the end, where that hose screws into the valve itself.

Thanks.

[backin15]

I hasve a Quickie which is basicly the same thing. Mine dripped a bit too. I then read the directions and it mentioned to make sure the check valve is tight. Unscrew the hose from the tornado and look into the end of it. If you see a large allen socket try tightening it. Mine was about a half turn loose and it took care of the leak.

[miatared]

Originally Posted by backin15

...Unscrew the hose from the tornado and look into the end of it.

The end of the hose or the Tornado?

The Tornado is screwed glued to the tank, a black adapter partially blocked somewhat and the hose.

Thanks