Winegard Satellite Troubles

[jdbenton69]

Has anyone had troubles getting Directv working through a Winegard Satellite in their Flagstaff? I think it is because there is a splitter somewhere between the outside satellite port to where I plug in my Directv receiver. Has anyone seen a wiring schema for their trailer?

I have a 2010 Flagstaff 831 RKSS....

Thanks for your help in advance!

[herk7769]

Originally Posted by jdbenton69

Has anyone had troubles getting Directv working through a Winegard Satellite in their Flagstaff? I think it is because there is a splitter somewhere between the outside satellite port to where I plug in my Directv receiver. Has anyone seen a wiring schema for their trailer?

I have a 2010 Flagstaff 831 RKSS....

Thanks for your help in advance!

In my 2010 Flagstaff the "Satellite" labeled F connector is hard wired to the top F connector on the Amp wall plate (SAT). It goes no where else.

The "Cable" Labeled F connector goes directly to the middle connector on the circuit board of the Amp wall plate (inside the wall)

The Amp Circuit board (inside the wall) has 3 connectors on the back and one on the front of the plate (TV1) (the bottom F connector).

The 3 back (Circuit Board side) F connectors are:

TV2
CABLE
ANTENNA (from roof)

In my camper there is a splitter on the back TV2 F connector. One leg goes to the Living room TV and the other leg goes to the bedroom tv.

Here is the wiring diagram from Winegard.

http://www.winegard.com/kbase/upload/2451487.pdf

[jdbenton69]

Thanks for the reply....!