Reply
 
Thread Tools Display Modes
Old 12-19-2018, 10:39 AM   #1
Senior Member
 
jmgllt's Avatar
 
Join Date: Feb 2015
Posts: 138
2011 Bathroom sliding door

When opening and closing the door makes a noise, anyone else have this problem and if so what did you do to repair it?
__________________

jmgllt is offline   Reply With Quote
Old 12-19-2018, 10:47 AM   #2
Denver To Yuma In 90 Days
 
Join Date: Mar 2018
Location: Yuma, Arizona
Posts: 3,882
Quote:
Originally Posted by jmgllt View Post
When opening and closing the door makes a noise, anyone else have this problem and if so what did you do to repair it?
I think we need more info than this...

What kind of noise?

And maybe a photo or two might help!
__________________

JohnD10 is offline   Reply With Quote
Old 12-20-2018, 11:38 AM   #3
Senior Member
 
jmgllt's Avatar
 
Join Date: Feb 2015
Posts: 138
Click image for larger version

Name:	IMG_0001.jpg
Views:	51
Size:	235.4 KB
ID:	193295
jmgllt is offline   Reply With Quote
Old 12-20-2018, 11:49 AM   #4
Senior Member
 
jmgllt's Avatar
 
Join Date: Feb 2015
Posts: 138
Is it the bottom or is there an adjustment on the top of the door
jmgllt is offline   Reply With Quote
Old 12-20-2018, 03:10 PM   #5
Senior Member
 
Join Date: Jan 2018
Location: Raleigh, NC
Posts: 1,784
The plastic slide

Quote:
Originally Posted by jmgllt View Post
When opening and closing the door makes a noise, anyone else have this problem and if so what did you do to repair it?
Can you figure out where the door is dragging in that slide cradle?

There are two possibilities.
  1. The door bottom is dragging in the bottom of the "U" slide cradle. If so, there should be adjustments at the top of the door to raise it. Sometimes these are round disks that you rotate (eccentric), other times slotted holes where you loosen screws and tighten door while lifting.
  2. The U-shaped cradle has twisted and the door is scraping on a fore corner on one side and aft corner on the other. In this case you must get the door out of the way (lift off?) and tighten the cradle mounting screws. If it was screwed down crooked at the factory, you may have to make a new hole for one of the screws.

Larry
Larry-NC is offline   Reply With Quote
Old 12-21-2018, 01:40 PM   #6
Senior Member
 
Mmnsc's Avatar
 
Join Date: Sep 2012
Location: Charleston County SC
Posts: 673
I have the same bottom slide guides as you do. The 2 screws you see are for adjusting the the space for the door upon installation. The mounting screws are not visible and behind the door. They are slotted so you can adjust up or down. You need to take out the 2 visible screws first then pull out the plastic holder so the door will swing free to the outside to get at the back screws. Before you go through the trouble of taking it all apart run some silicone grease on the bottom of the door and slide it back and forth a couple of times. It helped me correct my issue with that plastic part.
__________________

Mmnsc is offline   Reply With Quote
Reply

Tags
2011, bathroom, door, roo

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



» Featured Campgrounds

Reviews provided by


Disclaimer:

This website is not affiliated with or endorsed by Forest River, Inc. or any of its affiliates. This is an independent, unofficial site.




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 01:37 AM.