Has anyone changed their LP regulator on a Berk? I tried last week, but was unable to turn (loosen) the regulator because when I did, the body of the reg. hits the LP tank. Any suggestions?
Rich,
Can you hold the regulator to keep it from turning while you undo the fitting? I haven't looked at it but that may be the case. I'm sure you have seen posts here of others who have changed their regulators without a problem.
__________________
Tom and Margaret
2014 Berkshire 390bh-60
Ok, so I must be a moron.. Unless one of the threads on either the regulator or the tank valve fitting are reverse threads, the only way to get the regulator off is spinning the regulator. Am I missing something?
Done. Easy peasy! Only issue was a tube of gasoila thread sealer that I had with the regulator had turned to oil, so I used gas thread sealer. Just ordered another spare regulator and will get a pipe wrench for my coach tool box. Thanks.
Unless one of the threads on either the regulator or the tank valve fitting are reverse threads, the only way to get the regulator off is spinning the regulator. Am I missing something?
Linear Mode
