|
|
10-19-2014, 09:42 PM
|
#21
|
Senior Member
Join Date: Jun 2011
Location: On Another Adventure
Posts: 2,563
|
I ripped mine off.... Never had one come off a by itself in 40 yrs of RVing....
Sent from my iPhone using Forest River Forums
|
|
|
10-20-2014, 06:02 AM
|
#22
|
Senior Member
Join Date: Jan 2014
Posts: 157
|
J there is a paint Shop in Pa that took the paint codes FR gave me mixed the paint and put it in a spray can for me u can try doing a goggle search for something in your area. Jim
|
|
|
10-20-2014, 06:50 AM
|
#23
|
Senior Member
Join Date: Jan 2012
Location: Independence, Kansas
Posts: 755
|
My door has been coming loose on the last few trips. The two screws that hold it on come loose. The end of the last trip it was about to fall off.
|
|
|
10-20-2014, 07:34 AM
|
#24
|
Senior Member
Join Date: Aug 2012
Posts: 159
|
NO3putt - I've noticed in heavy winds, the door rattles enough that over time, the twist lock vibrates around - but I've never had it completely swivel. It will not happen again, I added a little twist tie to the latch.
Jrlebaron - great idea - with pics of the cans, I'll do some more looking!
__________________
Lurking - future Super C owner
2015 Landmark Newport
2019 Ford F450 tow vehicle
sold 2008 Berkshire pusher
sold 2010 Mini Cooper Convertible toad
sold 2015 Nissan Frontier toad
|
|
|
10-20-2014, 09:52 AM
|
#25
|
Berkshire 390QS
Join Date: Feb 2011
Location: Colorado
Posts: 1,489
|
Thanks for the reply, will make sure to keep the little tab flat and may put a little clip on it.
__________________
2011: 54 days, 2012: 218 days, 2013: 175 days, 2014: 196 days
2015: 188 days, 2016: 72 days, 2017: 185 days: 2018 182 days
2019: 156 days (2009 Berkshire, 390QS, and toad)
|
|
|
10-20-2014, 11:42 AM
|
#26
|
Senior Member
Join Date: Jan 2014
Posts: 174
|
I think mine came off due to my own fault. I probably didn't have it fastened completely. "Operator Error" in my case.
Sent from my iPhone using Forest River Forums
__________________
Glenn
Shopping for a XL or DX3
2019 Jeep Rubicon Unlimited
sold 2014 Berkshire 400BH
sold 2014 Jeep Rubicon Unlimited
|
|
|
10-20-2014, 12:36 PM
|
#27
|
Senior Member
Join Date: Jun 2011
Location: On Another Adventure
Posts: 2,563
|
How abt putting one of those small rubber coated pad locks on the pin outside??? It would never come off then...
Sent from my iPad using Forest River Forums
|
|
|
10-20-2014, 12:38 PM
|
#28
|
Senior Member
Join Date: Jan 2014
Posts: 174
|
I put a rubber coated clip on mine. Thought about a pad lock but I have to many keys to keep up with as it is.
Sent from my iPhone using Forest River Forums
__________________
Glenn
Shopping for a XL or DX3
2019 Jeep Rubicon Unlimited
sold 2014 Berkshire 400BH
sold 2014 Jeep Rubicon Unlimited
|
|
|
10-20-2014, 03:24 PM
|
#29
|
Senior Member
Join Date: Aug 2012
Posts: 159
|
Home Depot in the section they sell velcro and other clips has rubber coated "twist-ties" in various lengths. I've used the long ones for years with rolls of coax, electric cords etc. They have some that are just a couple inches long - I threaded that throughout the twist lock - can not blow off again and at about $1.50...
__________________
Lurking - future Super C owner
2015 Landmark Newport
2019 Ford F450 tow vehicle
sold 2008 Berkshire pusher
sold 2010 Mini Cooper Convertible toad
sold 2015 Nissan Frontier toad
|
|
|
10-20-2014, 04:33 PM
|
#30
|
Senior Member
Join Date: Mar 2013
Location: Cut Off, La.
Posts: 1,830
|
J my BnL didn't have any luck with those codes. He's still gonna try to find the colors for them.
__________________
2013 Berkshire 390BH
|
|
|
10-20-2014, 07:59 PM
|
#31
|
Senior Member
Join Date: Aug 2012
Posts: 159
|
Cajun - thanks for trying...
jrlebaron - I've sent the paint codes to about half-a-dozen web sites that mix paint and put into spray can applications. Have not heard from any of them yet. Thanks for the advice and suggestion.
__________________
Lurking - future Super C owner
2015 Landmark Newport
2019 Ford F450 tow vehicle
sold 2008 Berkshire pusher
sold 2010 Mini Cooper Convertible toad
sold 2015 Nissan Frontier toad
|
|
|
10-21-2014, 08:08 AM
|
#32
|
Senior Member
Join Date: Jun 2013
Location: Mount Laurel, NJ
Posts: 1,024
|
My tab that holds the cover on broke while at the dealer. It was plastic and they replaced it with a metal one. They said that the plastic ones are not good. As a precaution to all, check whether the heater door tab is plastic or metal. X2 to the additional safety tie or paper clip.
Hank
|
|
|
10-26-2014, 01:11 PM
|
#33
|
Senior Member
Join Date: Oct 2011
Location: Alberta Canada
Posts: 440
|
The little spring loaded tab lock on the Berk water heater cover is a joke. Luckily mine broke off in my hand while the unit was stationary ... I still have my cover.
Rather than attempting to replace the spring loaded gizmo, I fed a bolt through from the inside. Locked it in place with a nut ... leaving only about 1/4 inch of the bolt sticking out past the cover. I then secure the cover in place with a felt backed rubber washer and a wing nut. It work like a charm.
This will not bring back your lost covers but it will prevent then being lost a second time.
|
|
|
10-27-2014, 12:38 PM
|
#34
|
Senior Member
Join Date: Mar 2013
Location: Cut Off, La.
Posts: 1,830
|
That's a good idea lefaivre.
__________________
2013 Berkshire 390BH
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|