Ok looking good.
14 in freezer, 33 in fridge, 51 outside fridge ( just drinks, frequently opened)
That's with thermistor back in since this morning.
Here's the pics for your reference.
Remove cover by rotating 90 degrees black clips. Pull out from bottom.
Remove black cover over circuit board. One Philips screw at the top, use flathead screwdriver to put in slot and slide to the left.
Pops off with a little wiggling.
Locate "Sensor" probe.. On far left side of circuit board.
Here is a shot with it clipped on.
It is easy to just unclip or clip on by hand.
Sent from my iPhone using Forest River Forums