Here is what I was told to do.
Btw as originally thought there is no splitters in they way they told me to use system.
Hook sat cable to aux port on outside of camper.
Then use aux port @ living room tv to receiver hdmi to tv.
"That works"
For the bedroom tv I need to run a short jumper cable from aux to the port marked "dish"
The white is my jumper
Now I should have a signal in my bedroom "and I do" but it's so weak I loose signal.
Reason?
50' of cable from tailgater to camper.
25' of cable from camper inlet to aux port at living room tv.
25' jumper " I did not have a short piece"
Cable to go from aux port to "dish" port that goes to bedroom.
30' of cable to bedroom tv from dish port @ living room tv to bedroom tv
15' foot of cable "again shortest I had" from dish port in bedroom to receiver.
That's 145' of cable and I'm sure I'm running low on voltage to the tailgater which is why I'm getting signal loss.
I can eliminate 40 foot but will it be enough?
I'm calling columbus service this morning to find out what the other "dish satellite port" is on the outside of my camper which is the one that has the splitter.
And yes label is upside down on the wall plate because I can hardly reach it let alone see it, and I reinstalled it upside.
It's right side up now ok oc .
Stay tuned.
TURBS
2008 duramax
2015 columbus 320RS
2015 camping "31 nights"