concertone zx-75

[sschifer]

I was wondering the way to take the face plate off so I can remove the unit. Is it a pry type or do you push some sort of lock to pop it off.

[snjparham]

I am not 100% sure, but my guess is to pry off. I say this, because I watched the dealer replace my zx700 this last week and they simply used a small screwdriver on the underside edge and the bezel popped right off. This exposed the 4 screws that held it in. I would almost guess they are all the same.

[ALMcKinney]

Originally Posted by sschifer

I was wondering the way to take the face plate off so I can remove the unit. Is it a pry type or do you push some sort of lock to pop it off.

The side s just pop off I had to take mine out to due it failing.


Al

[leencharlotte]

There are two small holes on the side against the wall where mounted. There are tabs in there you can unlock with a small screwdriver or paperclip and then slide the small side piece straight off. If you pry, the tabs will break and not stay on next time

Edit: screws are under the side pieces

[Arn]

I'm on my second defective unit & I've had it. I had it out once as recommended by Concertone to remove "torque" on the unit. I'm thinking of removing it once & for all with a shotgun. If you don't have a shotgun then remove it as stated above. Let us know what you replace it with as there are many of us looking to add something reliable.

[schmowie.liebowitz]

Since the tread deal with Concertone...has anyone replaced one with something else? I purchased my Rockwood in 2006, before FR did anything about HD signals for TV. Needless to say my antenna and equipment are analog, so I was wondering if anyone upgraded to digital and how you all took the tv signal part out away from the Concertone controller (analog Concertones control the tv signal).