Display clock on Kenwood KDC-152

[macjack39]

Our new Rockwood A192HW camper came with an AM-FM radio and DVD player. It is a Kenwood KDC-152. I have looked at the manual and it shows you how to set the time on the clock but no information on how you can display the clock after you have set the time, unless you press Function->Settings->Clock. It would seem that once the time is set the clock should be displayed while you are using other functions such as the radio or DVD player. Anyone have any ideas on this?

Jack

[COHR]

Originally Posted by macjack39

Our new Rockwood A192HW camper came with an AM-FM radio and DVD player. It is a Kenwood KDC-152. I have looked at the manual and it shows you how to set the time on the clock but no information on how you can display the clock after you have set the time, unless you press Function->Settings->Clock. It would seem that once the time is set the clock should be displayed while you are using other functions such as the radio or DVD player. Anyone have any ideas on this?

Jack

Check out page 5 here:
http://manual.kenwood.com/files/52d48aa8a46e8.pdf

If you press the SCRL DISP button, does it get to the clock, and then does it stay there? If it changes between trips, are you disconnecting batteries or anything which might 'reset' the unit and go back to another default display setting?

[macjack39]

Funny, I had not noticed the SCRL DISP button before. I will try that the next time I have the camper up. Thanks again.
Jack

[COHR]

Originally Posted by macjack39

Funny, I had not noticed the SCRL DISP button before. I will try that the next time I have the camper up. Thanks again.
Jack

No worries, and good luck! Always helps me to have a second pair of eyes on a problem. I bet that'll be your solution.