Dometic refrigerator

[Quail]

I want install a small fan inside my frig. to the coil inside. To do this I need to put a hole through the case. My question is: I am assuming the box is just an insulated box with nothing between the inside and outside except insulation, so can I just drill a hole anywhere (missing the inside and coils that I can see) to run my wires?

[Witch Doctor]

I don't know if I would do that, other options are the 12V light inside or I ran the wire down the drain tube, never a problem, I have did it both ways.

[Quail]

I have no light in mine. The drain tube is a good idea.

[cavie]

follow the thermistor wires.

[Bama Rambler]

It would help us to know what model fridge you have. That way we would know what's available that you could tie into, or if running a wire through the wall would pose a problem.

[Quail]

Originally Posted by Bama Rambler

It would help us to know what model fridge you have. That way we would know what's available that you could tie into, or if running a wire through the wall would pose a problem.

I will look the next time I go in it.

[Platokidd]

Was lucky enough to have a plug , removed it ran the wire and filled the hole.


Get a fan with a light.

[str8t six]

what model fridge do you have? you dont have to drill any holes, you can just tap power off from the inside light.

[Quail]

No inside light, I just got the fan so I will use the drain.