Fire place won't light up Heater works fine

[fiverguy]

Replaced the bulb ,still no light

[brookstone345sa]

I would check for fuses or a GFI that is tripped. Mine wouldn't work, the nearby GFI had to be reset

[fiverguy]

I will check the gfi, but I can't understand why the heater would still work in the fire place Thanks for the reply

[brookstone345sa]

Don't know how yours is, mine has a 3 position rocker switch for heat temp, and it has a separate switch for the lights to work. At top of fireplace is a pull down vent and the controls are under there. Hope this helps

[aceinspp]

There are two on switches. Look at the top right as you are looking at the fire place. Switch to far right is power switch and left of that should be another on switch. Later RJD