Thread Tools Display Modes
Old 10-15-2015, 09:10 PM   #1
Senior Member
Join Date: Feb 2014
Posts: 111
Genesis 2.0/ Konka TV low volume fix (Again)

I read with interest Bryan2503S' post regarding lack of volume from the Konka TV.

I purchased a RCA cable as suggested previously, and when attempting to install it discovered that it was pre-wired from the factory.

After a frustrating 30 minutes I figured out that TV volume could be sourced thru the Genesis 2.0 "AV1" setting, and adjusted via the 2.0 remote.

I now get sound from one ceiling speaker (A, B or C). Is the way it is intended to work? TV volume, such as it is, still works independently from the 2.0

At least we can finally hear the TV, if only from one ceiling speaker!!
Henboy is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia Campgrounds

Reviews provided by is not in any way associated with Forest River, Inc. or its associated RV manufacturing divisions.

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 04:04 AM.