Jensen retrofit cable (to Concertone)

[trikebubble]

I pulled the Concertone (Model #RV2004DS) and snapped a pic of the main harness on the back end.
Can anyone tell me if the Jenson retrofit cable (#31100133) will attach to this Concertone harness?
I'm looking to replace it with the Jensen AWM975, if this harness works.
If not, and I have to cut and re-wire, then I would probably go with the Jensen AWM968 and get the Bluetooth option.

If the retrofit harness does not fit, has anyone cut and re-wired a Jenson into their trailer and are there any tips or things to look out for to share.

Thanks.

[trikebubble]

Anyone? The CEO is pushing for her new stereo.

[bikendan]

do you have pics of each harness end?

[trikebubble]

Not really. There are somewhat vague pix on the Jensen site, but they could just be a stock or sample photo. Can't tell for sure if the harness would match, and defiantly can't tell from the pix if the specific wires will match correctly.

[kndubois]

I'll be replacing a Concertone ZX700 with a AWM 975 this afternoon. It looks like I'll have to rewire everything. I haven't found any wiring harnesses online. I was hoping to use the wall mount Ipod docking station as well, but it isn't compatible with Jensen.

[trikebubble]

I decided to give up on the idea of installing another RV specific dvd/audio system and installed a Pionner car audio/multimedia system, along wit ha pair of new inside Pioneer speakers.

FYI. The speaker wiring diagram on the Concertone manual was different from actual trailer wiring. The inside and outside colored speaker wires were reversed. Just food for thought to actually double check your speaker re-wiring before you seal everything back up.