Replaced stove------------

[DAISY BOYKIN]

I just completed the SAM-1 mod to my stove vent hood. I saw the demo of the SAM-1 at the rally in the vender's show, I should have taken advantage
of their offer of $180.00 installed. But like a dummy, I waited until I returned
to Florida to order and install it myself. I still was able to get the RALLY price of $180.00 delivered.

This is not for a novice for removal of the vent hood and installation of the
SAM-1 mod.

If you have a HENG'S R0623500C vent hood (look under the under side of hood for sticker info) it will take a lot of work to remove the old vent motor
frame and install the new quite squirrel cage blower and LED lighting.

I had to drill out 32 spot welds, to remove the old HENG'S noisy vent motor &
frame. After removal and installation of the SAM-1 mod it did turn out very nice. You can not hear the vent motor running. It has three speeds, LED
bright for cooking and low LED for a night light.

I was able to use my exterior vent cover on the outside ( a replacement
is included in the mod). I was not able to use the wiring cover that was removed from the HENG'S hood, but was able to tie all wiring up out of the way.

I have included some photos for viewing as progress was being made.

[DAISY BOYKIN]

More pictures of SAM-1 Vent hood MOD. We can now hear the TV when the vent hood is on.