Help with Equal-i-zer setup
Just got a 2013 30WRLS & had the dealer install an Equal-i-zer 4-pt hitch. You can't ever trust them to install it right so I took some measurements & it doesn't make any sense to me at all. Here are the numbers i've measured:
Level camper top of coupler & truck ball are at same height
Rear wheel well height:
Loaded uncoupled: 37"
Coupled but no weight distribution: 35"
Coupled with distribution engaged: 34-7/8"???
Front wheel well height:
Loaded uncoupled: 34-3/4"
Coupled but no weight distribution: 36-3/4"
Coupled with distribution engaged: 35-3/4"??
This just makes no sense to me & I don't know where to start to fix it. Bars are tipped up towards the camper, not level. It does seem to tow ok though. Haven't weighed it yet since the scale is 30 miles away & would like to adjust first. Any ideas?
2013 Flagstaff V-Lite 30WRLS
2003 Silverado 5.3L 3.73 4x4