Originally Posted by JoeMazz
I also posted the inside on the table. Does it look similar to what you had going on with regard to the floor coming up?
Yeah Joe, Mine was like that. You can see where I had to put some 3/4" X 1" strips on the bottom inside of the cabinet to support the weight of the island. If not, any downward pressure, hard bouncing, etc, will make the wheels push the bottom up into the cabinet space. The floor is attached to the inside of the walls with staples only. Floor shoud be under the walls to hold the weight of the table. Pretty easy fix tho. 1 5/8" screws did the job.
2013 Rockwood 8282WS
Reese Revolution Pin, Reese 16K
2008 Tundra Limited Double Cab 5.7L
Air Lift 5000 w/Wireless Air