Upgraded from Voyager to P2, need help!

[hockeytownmom]

I had a Voyager brake controller in my 07 Suburban installed when I bought our Roo (purchased originally for a Chevy Venture & PUP). Anyway, I hated it so I bought a Prodigy P2 and did a wire to wire install and I'm not getting power to the controller. Any ideas? I'm going to cut and re-crimp the power line to see if that solves my issue.

[hockeytownmom]

Checked fuses, checked connected, disconnected the p2 and re-installed the voyager and nothing. That's one isn't working either.

[steeleshark2]

Originally Posted by hockeytownmom

Checked fuses, checked connected, disconnected the p2 and re-installed the voyager and nothing. That's one isn't working either.

Then has to be either a bad fuse, relay, or wire came loose. Time to start tracing trons.

[hockeytownmom]

We got it fixed last night. Whew! We're leaving in a few hours, that was nerve wracking!