3051 propane issue

[KJcachers]

Originally Posted by SkipnTerri

I used zip ties to secure the cable and cord to the hose.

Yeah, my bungee cord is broke so that is my issue. Contacting the dealer tomorrow to see if they can get me a replacement

[PNW 2016 3050]

In our 2016 3050, we found that the hose was gettin caught in the ridges of the bottom of the storage compartment causing enough friction that the hose would not retract into the black coiling box. Part of the problem might have been that the 90 degree hard fitting was not pointing the hose straight down. Anyway the dealer added a corrugated hose covering and a lot of Silicon grease. It is working so far.

[KJcachers]

I think I got it fixed! Repaired the coupler on the bungee and then had to play with the number of wraps around the gas line to get it to go in straight. Tried it 3 times in a row and all was good. Still going to keep an eye on it when we close up shop each time we use though.

[SkipnTerri]

Sounds like a fix! So far, so good on ours -- hope yours stays put, too.