3051s Tail light switch

[wana65stang]

I know the manufacturer of the tail lights is Bargman but I want to switch to LED lights, does any one know the model number of tail lights in a 2014 3051s Forrester? Or has anyone already done this and would have the LED model number? Thanks

[Kevin & Judy]

Here is a link to the tail light modules to change over on your forester, I did all of the tail.brake and back up lights on mine. Much brighter and do not have to worry about a burnt out bulb.
Amazon.com: Bargman 47-84-410 Red LED Upgrade Kit for #84/#85/#86 Series Stop/Tail/Turn Light: Automotive

[Witch Doctor]

Originally Posted by wana65stang

I know the manufacturer of the tail lights is Bargman but I want to switch to LED lights, does any one know the model number of tail lights in a 2014 3051s Forrester? Or has anyone already done this and would have the LED model number? Thanks

You can really put any light that you want on, they have all different sizes, just get one close to your dimensions and install them.

[bwcarp]

If you don't want to change the housing,these are the best l.e.d. plasma replacement bulbs. Plasma LED - Two Pack Replacement 1157 Bulbs - Stop / Rear Turn Signal / Rear Parking Light - Repro ~ 1967 -1968 Mercury Cougar / 1967 - 1973 Ford Mustang (10043) at West Coast Classic Cougar :: Specializing in 1967, 1968, 1969, 1970, 1971, 1972, and This is the cheapest place around. As long as there 1157 bulbs.

[RvBill3]

Here is the Bargman conversion LED's. Just unscrew the original lens and remove the bulb. The replacement one has a bulb like end that fits into the original bulb socket. Replace the screws and you are done. One minute conversion. They are incredibly brighter and react quicker when brake pedal is pressed.


Bought them on Amazon.


2012 Forest River Sunseeker 2300 Chevy