3051s vanity handles

[West Cactus]

I just had this returned from warranty work to match the handles. The right side still is higher than the left. Anyone else with the 3051 have issues with quality control on the bathroom handles? Thanks!


Picture loaded sideways!

[OldCoot]

Just loosen the handle and slide it until it is aligned. If the holes won't allow it, just slot one with a file, the handle will cover the slot and no one will ever know. Minor irritation.

[RedLdr1]

The bottom drawer front is installed upside down. Look at the wood pattern and it becomes obvious....

[OldCoot]

Not that big a problem either, just take it off and turn it.

You shouldn't have too, but at least you will know it's done right!

[West Cactus]

It is the vanity doors. Picture will not turn! Problem is it is new but can not get the handles close to match so far!

[OldCoot]

Originally Posted by West Cactus

It is the vanity doors. Picture will not turn! Problem is it is new but can not get the handles close to match so far!

If you are talking about them not being at the same height, just slot the holes a little and slide one down and the other one up.

[West Cactus]

Originally Posted by OldCoot

If you are talking about them not being at the same height, just slot the holes a little and slide one down and the other one up.

I really hope it is not that easy! I'll give it a try!

[rekwiat]

Looks good to me.