We just found a problem with ours the first time out. It leaked water while driving, both on the way there and the way home. Yeah, lots of rain. It was coming in under the dinette. Took it to the dealer thinking there was a seal issue around the slide. I called them a week later and they said the slide frame was bent because we closed it on something. They said we left the bed up and closed the slide. We didn't and I protested their explanation. You can't leave the bed up because there aren't any shocks. I've operated it just as we've been shown (no obstructions, door, vent or window open, and hold the button an additional 3-4 secs after movement stops). We've only owned it since January and this was the first time out. Either this damage was done before we bought it or there is something wrong with it that is causing the damage. They resubmitted the warranty claim and it was approved.
Knowing that we didn't cause the damage or at least cause the damage by mistakenly closing it on something, now I am concerned about how this happened.
Anyone know of something that would get caught on the back end (bed end) that would prevent the slide from coming in? I saw one of the previous posts about stuff getting wrapped on the rollers. Anything else?