Originally Posted by bclemens
If we did a larger half moon cut on the main cover, would that achieve the same purpose? I think I'll send this to our countertop people. Good idea.
As I mentioned, we made the lid slightly larger on one half as it does give it more stability and support.
Actual measurements are the lid is 17"
Made larger half 10" radius minus 1/8" for kerf of cut
Small portion of lid is 7"
I thought it was more offset, but only 1 1/2" and it does make a difference.
Attached photos show the cut in half template on top of the one I used on the bottom.
I mentioned this to Kary K at the Pomona RV show and I believe he might be keeping up with my ideas and mods.