As I've mentioned before, my travel rods that are probably for my Schwintek ,should I have to remove the motors, are 18.5" each and the slide-out is around 29". So I made my own out of EMT 1" pipe that my neighbor had left over from his electrical job.
I also made a copy of the Schwintek manual and placed it in the compartment under the slide-out bed where the controller is. I had added a hatch under the bed for easy access to the controller should the need arise and I also have a marked view of my FW tank. Otherwise, you have to take your bed apart or pull the fuse/power/converter panel to find the slide controller.
Notice in the bottom photo the FW tank when empty has 3 gallons left. My science experiment!
2004 Winnebago Minnie 22e(went to a nice family Oct 3, 2015)
2016 Forester 2701DS (Aug 31, 2015)
2015 Camping 3 trips 6 nights
2016 Camping 9 trips 28 nights