|
12-15-2014, 04:04 PM
|
#1
|
Member
Join Date: Jan 2013
Posts: 92
|
Adding remote backup camera display
Bought a 7" monitor as others here have done on these forums (Brand new 7 inch TFT LCD Digital Car Rear View Monitor With Remote and Stand by sunvalleytek http://www.amazon.com/dp/B004Y3FE6O/..._Q3AZtb0JKQXQA). Installed it in my '14 351DS and happy overall with install but it only shows rear camera and not the side ones. I used the video out port on the video hub (see pic) to feed new monitor but with turn signals or reverse it stays on backup camera only. Any one that has done this mod found a way to have the added monitor mimic the main display?
Did find image for rear camera was mirrored and changed that easily via switches on monitor hub.
Thanks.
Sent from my iPad using Forest River Forums
|
|
|
12-15-2014, 05:46 PM
|
#2
|
Senior Member
Join Date: Nov 2013
Location: Quitman MS
Posts: 434
|
I would like to do this also - where is the video port located & what video cable did you use to run to it? Thanks
Sent from my iPhone using Forest River Forums
|
|
|
12-15-2014, 06:12 PM
|
#3
|
Member
Join Date: Jan 2013
Posts: 92
|
I used the video out port of the factory camera system hub (you can see the yellow cable in my hub picture) -the new monitor and the hub were set up for typical 3 cable video/audio patch cords (like used before HDMI came along).
Sent from my iPad using Forest River Forums
|
|
|
12-15-2014, 06:17 PM
|
#4
|
Senior Member - Retired
Join Date: Jun 2014
Location: Yorba Linda, CA
Posts: 398
|
FL family
Looks good. How did you decide to mount the stand to your MH dash?
__________________
John & Gloria Hunsaker FROG Member CA-0030-988
2014 Georgetown XL 334QS (class A with 4 slides)
2013 Smart Car TOAD
Blue Ox Aventa LX tow bar, base plates, diode kit
SMI Stay-IN-Play Duo auxiliary braking system
25' Off shore blue water fishing boat
|
|
|
12-15-2014, 06:24 PM
|
#5
|
Member
Join Date: Jan 2013
Posts: 92
|
I used the included 2 sided custom cut base tape. Time will tell how it well it stays in place. I am not one to screw into dash.
Sent from my iPad using Forest River Forums
|
|
|
12-16-2014, 11:26 AM
|
#6
|
Senior Member
Join Date: Apr 2014
Posts: 514
|
FL Family,
When I hooked mine up I simply disconnected the yellow camera wire from the rear of the head unit (Stereo) and connected it to the Monitor. that allowed me to see the side cameras when the appropriate blinker was selected.
did you try that method?
__________________
2014 Georgetown XL 352QS
2013-2019 Days Camped-502
|
|
|
12-16-2014, 03:26 PM
|
#7
|
Member
Join Date: Jan 2013
Posts: 92
|
I did not see a yellow plug from camera multiplexer to the stereo. Will check again.
Sent from my iPad using Forest River Forums
|
|
|
12-16-2014, 03:53 PM
|
#8
|
Senior Member
Join Date: Apr 2014
Posts: 514
|
Quote:
Originally Posted by FL family
I did not see a yellow plug from camera multiplexer to the stereo. Will check again.
Sent from my iPad using Forest River Forums
|
What unit (RV) do you have? if it is a 351, then it would be from you stock BU Camera display
__________________
2014 Georgetown XL 352QS
2013-2019 Days Camped-502
|
|
|
12-16-2014, 04:06 PM
|
#9
|
Senior Member - Retired
Join Date: Jun 2014
Location: Yorba Linda, CA
Posts: 398
|
How do you gain access to the unit? Do you have to remove the shroud around the radio/nav or can you reach in from under the dashboard?
__________________
John & Gloria Hunsaker FROG Member CA-0030-988
2014 Georgetown XL 334QS (class A with 4 slides)
2013 Smart Car TOAD
Blue Ox Aventa LX tow bar, base plates, diode kit
SMI Stay-IN-Play Duo auxiliary braking system
25' Off shore blue water fishing boat
|
|
|
12-18-2014, 08:32 PM
|
#10
|
Member
Join Date: Jan 2013
Posts: 92
|
This is for my 2014 GT 351DS factory 3 camera system. Access to most components is by removing black insert on center of dash (that holds radio, climate control, main camera display etc). I did get a response from supplier Rear View Safety "This would not be possible to do with our system.". I only have the hard wire from multiplexer into the main display and nothing going to stereo unit. I am beginning to see I may just have the constant rear camera view on my added monitor.
Sent from my iPad using Forest River Forums
|
|
|
12-19-2014, 08:03 AM
|
#11
|
Senior Member
Join Date: Apr 2014
Posts: 514
|
FL Family,
How does the multiplexer connect to the factory monitor?
That connection should be the one used for the new display you installed.
__________________
2014 Georgetown XL 352QS
2013-2019 Days Camped-502
|
|
|
12-19-2014, 08:09 AM
|
#12
|
Senior Member
Join Date: Oct 2014
Posts: 995
|
Quote:
Originally Posted by chrisbailey13
FL Family,
How does the multiplexer connect to the factory monitor?
That connection should be the one used for the new display you installed.
|
With a wire
But seriously, we would like to know.......
Thanks
|
|
|
12-19-2014, 12:09 PM
|
#13
|
Member
Join Date: Jan 2013
Posts: 92
|
Multiplexer end is a 13 pin connection but monitor end is hard wired.
Sent from my iPad using Forest River Forums
|
|
|
12-19-2014, 02:55 PM
|
#14
|
Senior Member
Join Date: Apr 2014
Posts: 514
|
OK,
Not sure if it is cost prohibitive, but sounds like you need one of the RSV Switchers (RVS-227-3) that would replace the multiplex device.
__________________
2014 Georgetown XL 352QS
2013-2019 Days Camped-502
|
|
|
12-20-2014, 09:28 AM
|
#15
|
Member
Join Date: Jan 2013
Posts: 92
|
Thanks. That multiplexer is sim to factory installed one just gives you 2 video outs (vs 1). There was a post about a month ago where someone installed the same monitor but it seems like it was moved or deleted now. It had a picture of the dash area including the monitor with some traffic in the background.
Sent from my iPad using Forest River Forums
|
|
|
12-20-2014, 08:02 PM
|
#16
|
Senior Member
Join Date: Apr 2014
Posts: 514
|
Quote:
Originally Posted by FL family
Thanks. That multiplexer is sim to factory installed one just gives you 2 video outs (vs 1). There was a post about a month ago where someone installed the same monitor but it seems like it was moved or deleted now. It had a picture of the dash area including the monitor with some traffic in the background.
Sent from my iPad using Forest River Forums
|
That was probably mine.
But, Since my rig is an 352 the stock monitor is on the Double DIN radio and the multiplexer has RCA outputs instead of the 9 pin DIN plug you have in the 351.
__________________
2014 Georgetown XL 352QS
2013-2019 Days Camped-502
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disclaimer:
This website is not affiliated with or endorsed by Forest River, Inc. or any of its affiliates. This is an independent, unofficial site.
All times are GMT -5. The time now is 09:19 AM.