Originally Posted by E-man
I've been having this issue for the last few weeks and can't figure out the trick to get it to work again.
Every time I retract the awning one or both sides/poles don't fit into the columns that are anchored to the motorhome. I have to pull it back out move it left or right and it takes me 2 or 3 tries to get so it will lock securely.
Is there an adjustment I could make to make it work like before?
I would first look where the awning material slides into the groove on your roof. Normally a set screw will hold it in place and stop it from sliding right or left in the groove. The screw may have come out and the material has slid front or back from center which may cause your issues.
Take a look for the screw on either side of the grooved metal on your roof.
See picture of the screw i'm talking about