My unit is a 2012 378TS. Where/how can I gain access to the black water tank clean out spray nozzle? The output from the backflow control valve disappears below the washer/dryer compartment floor and from there???
My unit is a 2012 378TS. Where/how can I gain access to the black water tank clean out spray nozzle? The output from the backflow control valve disappears below the washer/dryer compartment floor and from there???
My unit is a 2012 378TS. Where/how can I gain access to the black water tank clean out spray nozzle? The output from the backflow control valve disappears below the washer/dryer compartment floor and from there???
It is located in the campartment that the hot water heater is located.
Upper right hand corner is where it is located.
It takes a lot to remove the panel.
No issues at this time. I have read on this forum (378 units) that individuals have removed a panel and checked their spray nozzles at the tank for clogs. I would like to know how to get to that nozzle. Sometime back I had an issue with a cloged nozzle and cleared it with compressed air at the output side of the backflow valve. I could not locate an access to the tank nozzle. I guess I got lucky when the air cleared it but for future reference, accessability to the nozzle will be invalueable.
Linear Mode
