Broken faucet handle 2016 364TS

[Walte1fr]

We have a broken faucet handle from a 2016 364ts. Anyone know the replacement part? I couldn’t find a name on the faucet

[elind]

What faucet is it? You can fit most faucets with something from Home Depot or Lowes. I replaced my bathroom faucet with a Home Depot one for $30 and better quality. It fit so well and took me 5 minutes to install.

[doc73]

I agree. I broke one of our faucets when I let it freeze. They wanted $75 from FR for the plastic one. I got a Moen from Lowes for a lot less.

[outofTucson]

I agree I bought mine off the internet two things to watch for if its a 3 hole vs one whole mixer. Make sure the hole span matches. Also take a good look at the connections for your water supply lines I had to buy a $5 each brass adapter from Ace Hardware to connect the water supply lines. I guess a third thing to watch for is the drain I left the old one in and didn't mess with a new one. Even though the faucet came with a new one

[Walte1fr]

Ok thanks. Right now both bathrooms match. I have heard just to replace the cheap plastic with metal

[D W]

Originally Posted by doc73

I agree. I broke one of our faucets when I let it freeze. They wanted $75 from FR for the plastic one. I got a Moen from Lowes for a lot less.

X2. Either Lowes or Home Depot will save you 50%. Of course you can get as fancy as you want and pay more. Generally the kitchen is an 8" while the bathroom is a 4".

[jeff64]

I believe that FR uses a bunch of the Dura Faucet brand fixtures . My shower had one of those that both knobs turned the same direction which made it a "B" to adjust temp and volume. I found a single handle faucet of this brand on Amazon that works better, pretty much matched all the other faucet finishes in the TT , didn't cost an arm and a leg and was a direct fit

[johnruff]

I replaced every faucet in every fiver I have had. The plastic is not built to last very long so go to Lowes or Home Depot and get something you like, just be sure the base is made for the holes you have in your unit. for my current unit I replaced the kitchen unit with a pull down nozzle and used the extra hole for a detergent pump - all brushed nickle color and all metal.

[dmchapman]

Originally Posted by jeff64

My shower had one of those that both knobs turned the same direction which made it a "B" to adjust temp and volume

I cannot understand why anyone would design a faucet this way.