Haha, how many people does to take to change an LED bulb in my Georgetown? Well hopefully not many, but I don’t know how so I’m leaning on my FR Forum peeps.
I went to change one of my overhead LED’s and see that it’s not a typical bulb, even for an LED...it’s a tape light that is soldered in. I’m sure this is somehow an easy fix, but I’ve never seen a bulb assembly like this and don’t know what to do here.
Are you and good at soldering? If so, de-solder the old bulb and solder in the new one.
On a side note, it kind of looks like that one is soldered backwards. It looks like black is going to the + side. Has that bulb ever worked?
__________________
2021 Transcend Xplor 247BH
Husky WDH with Sway Control
2021 Chevy Silverado 2500HD LT 6.6L V8 Duramax
Forever in my memory. Forever in my heart.
Laurie J. Wood 3/22/67 - 8/23/19
timfromma, I could be wrong but isn't the positive wire on 12vdc either black or white with black stripe positive? If so, then it is wired correctly. I know some 12vdc systems have a red and white or black and red wires. Connecting a multimeter set to measure dc voltage will tell you which is positive and which is negative.
__________________
Richard & Jill
2014 Flagstaff 832IKBS Classic Super Lite
2018 Silverado 1500 Crew Cab Z71 4WD All Star Edition
Camping since 1989, Seasonal since 2000.
Car Shredder Op/Tech, Scrap Metal Recycling - retired
Linear Mode
