Thread Tools Display Modes
Old 10-01-2012, 02:56 PM   #1
Join Date: Jul 2012
Location: Biloxi, MS
Posts: 41
Lightbulb Drawer Slides

I have a 2007 Georgetown motor home 370TS. I previously filed this under Draw Slides & Sockets. I thought the problem was solved, but I was wrong. I thought the slides were made by Liberty from Home Depot but they did not fit today when I tried to make the repairs.
Does anyone know who makes the drawer slides that Forest River uses in the Georgetown that will fit into the RV Designer Collection socket # H307? I need to order 22" drawer slides. I can then cut off about 1/2" because the depth of drawer cabinets is 21 1/2" deep.
Thanks, Elmer Gaudet from Biloxi, MS

elmerg is offline   Reply With Quote
Old 10-01-2012, 04:26 PM   #2
Senior Member
fonzie's Avatar
Join Date: Sep 2010
Location: Eastern Ontario
Posts: 2,795
Would this be it?

RV Designer Collection RV Designer Collection H307 Drawer Slide Sockets - Tools - Home Hardware & Vents - Cabinet Hardware

2011 Rockwood 8319SS with ProPride 3P hitch/GoodYear Marathons/TST TPMS 507
2008 F250 Lariat CC SB 6.8L V10 4.10 axle ratio (NITTO TERRA GRAPLER G2 LT275/65R20E)
Yamaha 3000iseb generator:Progressive Ind. EMS-HW30C : Eastern Ontario
Nights Camped: 2011(21) 2012(36) 2013 (17) 2014 (18) 2015 (18) 2016 (36)
fonzie is offline   Reply With Quote
Old 10-01-2012, 05:40 PM   #3
Join Date: Jul 2012
Location: Biloxi, MS
Posts: 41
Yes this is the correct slide socket. What I need is the Drawer Slide in 22" length. I called RV Designer and they are researching who makes the slide.
elmerg is offline   Reply With Quote
Old 10-06-2012, 05:01 PM   #4
Senior Member
Join Date: May 2012
Posts: 357
The arrowhead locks for the large drawers in the hallway between the kitchen and bedroom in my 2011 327DS won't hold the drawers closed on winding mountain roads. When the drawers fell out, the slides were damaged. FR replaced them for me in August and I've modified the drawers so that they can't open while travelling.

I replaced the bolts that hold the drawer knobs on with longer ones. A 3/8" x 1.5" piece of metal, with a hole near one end was snugged up to the bolt head with a nut. A washer and nut on the inside of the drawer front provide a way to adjust the friction needed to turn the knob and rotate the piece of metal up behind the divider between the drawers. Loctite on the threads keeps everything from coming loose and when locked, the drawers can't open up. I also glued small magnets to the bar and drawer dividers. The magnets keep the lock in place and I can tell by "feel" when the drawer is locked.


pmsherman is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia Campgrounds

Reviews provided by is not in any way associated with Forest River, Inc. or its associated RV manufacturing divisions.

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 06:59 AM.