Does anyone know how to remove the fireplace in a 2013 georgetown xl 378. I tried removing the two screws on either side but the fireplace does not want to come out. Is there a flange on the top of the unit that might be under the faux brick? The top of the unit seems to want to stay in place while the bottom does come out about an inch.
Thanks
I did remove all four screws but still having a hard time pulling the fireplace out. It may just be wedged in place tightly. I'll continue trying I just don't want to pull on it if there are more screws I am unaware of. Tomorrows another day.
Should be 4 screws one in each corner. Look close as on mine they used black screws on a black frame.
__________________
Glen & Robyn (A.K.A. Puff & Crickit) Full Timers..
2006 F350 6.0 with 3.73 gears, 4X4, Extra-Cab Long Box, Oil/Tranny/P.S. Coolers. Coolant filter. SCT Livewire.
2011 Cedar Creek 36RE, Auto levelers + too much to list..!
Linear Mode
