Hydraulic Reservoir

[reddiver]

OK; I have a 2003 Georgetown 325 and am wondering where they have put the hydraulic reservoir in it . I wanted to check fluid levels and couldn't find the reservoir.
Any suggestions?

[bend302]

First, this should have been a PDI item.

Mine (Older version 2005) is behind a panel in a compartment on the driver side near the front. That's where the hydraulic pump, etc. is.

Bill

[SKnight]

Do something to run the pump and follow the noise it makes. The reservoir should be part of the pump or very near it.

Check it with all cylinders closed up. That will put the fluid at it's highest level so you can check it. If you don't close all the cylinders first, set the fluid level to spec then when you close the cylinders then you'll have fluid everywhere.

Typically, when it's set to travel, slides in, etc, is when the cylinders are closed.