|
|
05-13-2018, 03:31 PM
|
#41
|
Senior Member
Join Date: Dec 2012
Posts: 7,652
|
Do not engage the ignition switch when doing the above the ignition interlock will defeat the slides from working.
|
|
|
05-16-2018, 05:27 PM
|
#42
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
I have tested my relay , I have 13 volts at relay , when I press my slide out switch I get 13 volts at my hydrolic motor but motor wants to work but doesn’t , i they’d tapping on motor at same time but still nothing . Don’t see any info on motor , does anyone know what replacement motor I need
( 2013 Georgetown xl 378 )
|
|
|
05-16-2018, 06:24 PM
|
#43
|
Senior Member
Join Date: Jan 2013
Location: Space Coast of Florida
Posts: 4,024
|
Quote:
Originally Posted by gpci
I have tested my relay , I have 13 volts at relay , when I press my slide out switch I get 13 volts at my hydrolic motor but motor wants to work but doesn’t , i they’d tapping on motor at same time but still nothing . Don’t see any info on motor , does anyone know what replacement motor I need
( 2013 Georgetown xl 378 )
|
What does “wants to run” sound like?
Another poster said your RV has 3 slide switches. Does this happen with all 3?
__________________
2016 Siverback 33IK, Towed 50K+ mile
2018 Ford F-350 Lariat 6.7L V8 Diesel 4WD Crew Cab
"If you don't know where you are going, any road will get you there."
|
|
|
05-16-2018, 06:51 PM
|
#44
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
Yes happens with all three slides
|
|
|
05-16-2018, 08:12 PM
|
#45
|
Senior Member
Join Date: Jan 2013
Location: Space Coast of Florida
Posts: 4,024
|
Does the 13 volts change polarity at the motor when you press extend then retract?
__________________
2016 Siverback 33IK, Towed 50K+ mile
2018 Ford F-350 Lariat 6.7L V8 Diesel 4WD Crew Cab
"If you don't know where you are going, any road will get you there."
|
|
|
05-16-2018, 08:13 PM
|
#46
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
Slides won’t move at all
|
|
|
05-16-2018, 08:14 PM
|
#47
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
Not sure I will check tomorrow
|
|
|
05-16-2018, 08:17 PM
|
#48
|
Senior Member
Join Date: Jan 2013
Location: Space Coast of Florida
Posts: 4,024
|
What position are the slides now? All in, all out or somewhere in between?
__________________
2016 Siverback 33IK, Towed 50K+ mile
2018 Ford F-350 Lariat 6.7L V8 Diesel 4WD Crew Cab
"If you don't know where you are going, any road will get you there."
|
|
|
05-16-2018, 08:19 PM
|
#49
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
Dalford , motor making noise when switch pressed but sounds like motor not spinning
|
|
|
05-16-2018, 08:25 PM
|
#50
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
Slides are all out
|
|
|
05-16-2018, 08:48 PM
|
#51
|
Senior Member
Join Date: Jan 2013
Location: Space Coast of Florida
Posts: 4,024
|
Quote:
Originally Posted by gpci
Slides are all out
|
Ok.. make sure the voltage swaps polarity at the motor when you push extend/retract. There is a possibility the relay is not swapping polarity of the voltage at the motor and the pump is still trying to extend the slide and there is no extend left and the motor bogs/stops. Just a quess...
__________________
2016 Siverback 33IK, Towed 50K+ mile
2018 Ford F-350 Lariat 6.7L V8 Diesel 4WD Crew Cab
"If you don't know where you are going, any road will get you there."
|
|
|
05-16-2018, 08:50 PM
|
#52
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
Tks for the info , I will reply after I check tomorrow
|
|
|
05-17-2018, 01:54 PM
|
#53
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
Removed hydraulic motor , connected 12 volts , still wouldn’t work , opened motor to find 2 of 4 magnets broken
Now have to find correct replacement as motor has no markings anywhere ,
|
|
|
05-17-2018, 03:21 PM
|
#54
|
Senior Member
Join Date: Jan 2013
Location: Space Coast of Florida
Posts: 4,024
|
Quote:
Originally Posted by gpci
Removed hydraulic motor , connected 12 volts , still wouldn’t work , opened motor to find 2 of 4 magnets broken
Now have to find correct replacement as motor has no markings anywhere ,
|
Good news, I think .. looks like you have pinpointed the problem. There was a post on here not to far back where someone rebuilt or maintenances their motor. I look to see if I can find that thread or they might just chime in..
__________________
2016 Siverback 33IK, Towed 50K+ mile
2018 Ford F-350 Lariat 6.7L V8 Diesel 4WD Crew Cab
"If you don't know where you are going, any road will get you there."
|
|
|
05-17-2018, 03:24 PM
|
#55
|
Senior Member
Join Date: Jan 2013
Location: Space Coast of Florida
Posts: 4,024
|
Here is the thread.. not sure if same motor but PM the OP and ask questions... good luck.
http://www.forestriverforums.com/for...or-155399.html
__________________
2016 Siverback 33IK, Towed 50K+ mile
2018 Ford F-350 Lariat 6.7L V8 Diesel 4WD Crew Cab
"If you don't know where you are going, any road will get you there."
|
|
|
05-17-2018, 06:24 PM
|
#56
|
Senior Member
Join Date: Sep 2017
Posts: 119
|
Tks dalford that was great info , I wouldn’t mind paying $800 for a new motor except it’s become obvious Lippert motors are not a quality motor in my opinion ,
Tks for the help , your help is truly appreciated 🤠
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|