No water to toilet

[kdcamper]

Okay here's a weird one started our 3weeks got to our first campsite hooked up to water went to flush and no water, worked fine 2 weekends ago, any ideas, even tried tank water still no water. Have lots in tank and campground water, any ideas.

kdcamper 2014 Georgetown 377xl towing 2013 Toyota RAV4


Sent from my iPad using Forest River Forums

[Ford Idaho]

Construction debris in the flush valve.

[Sbryant]

Debris in flush valve - the flush valve can be removed by releasing the snap-in tabs and sliding it out toward the hose. Then disconnect the hose, look down in the hole where the hose went and then clean out the filter there. Mine was stopped up with fine white plastic shavings on our GT 360 XL


Sent from my iPhone using Forest River Forums

[abjb]

Easy fix.
Turn the water off to your Georgetown.
Turn the sink or shower, hot and cold on to relieve the pressure.

Take the water hose off at the toilet, no tools needed.
There's a screen on the toilet, clean it with a paper towel and a toothpick.
There should be a lot of stuff.

Re-attach the hose, don't lose this thread IT WILL HAPPEN AGAIN.

MUCH more info here.
http://www.forestriverforums.com/for...ain-84612.html
and
http://www.forestriverforums.com/for...let-69645.html
ETC.

[kdcamper]

Thanks I will look into that when I'm not so tired thanks for the help


Sent from my iPad using Forest River Forums

[mogman]

While you have the tools out, clean the filters on the kitchen and bath faucets. I do them once a year. Its suprising how much crud is in the FW system, even though we have a full flow filter on the water inlet.

[DrewG]

I had to do mine too on Saturday. Must be somethin' in the water.

As the others said, it was an easy fix.

[Jim in Halifax]

Arrived home from FL first of May....Parked 5er in DW until last Thursday....Left to go to a CG here in NS....After setup could not flush toilet...Got book out and called Dometic to verify problem and how to remove flush switch.....Took it apart and screen was plugged solid with hardened sand.....Washed it in a bucket of water and reinstalled...Still would not flush...Went to dealer and got a new one and I installed it for $60.00!!!!!.... Now works.....Will take old one home and blow it out with air gun and keep as a spare......Taps had no sand in screens???? Go figure that one out!!!! J
PS I do have a filter installed at 5er