Ouch i did mean that.lol try this1. Cut a 4” (102mm) W x 3” (76mm) H hole.
2. Connect the Red wire to the 12 volt supply (+).
Connect the Black wire to the 12 volt Ground (-)
3. 3. Relay Output - White12 vDC Supply (+)
- Black/White Stripe Ground (-)
Note: Some devices do not require correct polarity and can be
connected and can be connected to either terminal or wire.
4. Interconnect Wiring – Series (Daisy Chain) Connect Blue to Blue and
Yellow to Yellow. Hope this helps. By the way i just Google the part # you gave me. Now its his turn. Just kidding. Safe travels
__________________
Ram 1500
Big Horn
Hemi 5.7 2011
Salem 30KQBSS 2012
|