Originally Posted by xgzx
If you look in the basement compartment directly under the dinette, there is a shaft protruding out with a hex end for a socket, it retracts the dinette manually. The other 2 slides are schwintek slides, you have to find the electric motors on each side of the slide, unhook them, and push the slide in manually. I believe there are videos on youtube showing how to do this.
You should first try the slide controller override before dropping the motors off the track.
1. Electronic Manual Override (available on board revision C1
A. Locate the circuit board.
B. Press the “mode button” six times quickly, then
press a seventh time and hold for approximately five
seconds (Fig. 1).
C. The red and green LED lights will begin to flash,
confirming the override mode.
D. Release mode button.
E. Back inside coach; use the normal slide control
switch to retract the room.