|
09-30-2017, 08:24 AM
|
#1
|
Member
Join Date: Nov 2016
Location: Round Rock, Texas
Posts: 55
|
Bedroom ceiling light
One of the five inch round ceiling lights above the bed has gone out. It looks like the push on/off switch stopped working. How do you remove the cover of these lights?
|
|
|
09-30-2017, 08:31 AM
|
#2
|
PhD, Common Sense
Join Date: Feb 2017
Location: Fairborn, OH
Posts: 1,384
|
On mine, you grab and pop it off.
|
|
|
09-30-2017, 08:34 AM
|
#3
|
Site Team
Join Date: Mar 2008
Location: Louisville, KY
Posts: 10,525
|
A photo of the light might help.
__________________
Peace!
Dan & Rita D
2017 Nissan Titan 5.6L King cab 4wd
2016 Evergreen Everlite 242RBS
29' empty nest model. Blue Ox WD hitch
(1 queen bed, large main cabin and huge bathroom)
Camping days 2010-53, 2011-47, 2012-41, 2013-41, 2014-31, 2015-40, 2016-44, 2017-63, 2018-75, 2019-32, 2020-41, 2021-49, 2022-43, 2023-66
|
|
|
09-30-2017, 09:12 AM
|
#4
|
Senior Member
Join Date: Oct 2016
Location: New Jersey
Posts: 239
|
lights
Mine unscrew counterclockwise.
__________________
2017 Rockwood 2304DS Ultralite
2012 F-150 4X4 XLT 5.0 V8
|
|
|
09-30-2017, 09:12 AM
|
#5
|
Senior Member
Join Date: Aug 2013
Posts: 7,916
|
Twist the lens to the left 1/8-1/4 turn. It's kinda hard to turn the first time.
__________________
2017 Puma 297RLSS
2005 Ram 2500 4X4 diesel SMOKER!!
I love puns, irony and tasteless jokes...
born in Texas.... live in Arkansas
|
|
|
09-30-2017, 11:44 AM
|
#6
|
Member
Join Date: May 2017
Posts: 30
|
Commandelectronics LED lights
I used a thin butter knife insterted around the lens, it popped off. By the way these lights are too dang bright in the bedroom and in the dinette and because they each have a built in power supply an external dimmer cannot be used. They are made by commandelectronics.com. Cheap, maybe they have a style with built in dimmer.
|
|
|
09-30-2017, 01:03 PM
|
#7
|
Senior Member
Join Date: Jan 2015
Location: West Michigan
Posts: 641
|
unscrew counter clock wise to remove the lens cover. It is most likely an led light fixture that has no bulb or led emitters that can be replaced. after you remove the lens cover there are 2 or 3 screws that hold it in place. Remove it and look on the back for MFG and model #. You will need to buy or if you still have a warranty to replace it. Talk to dealer or look on amazon for replacement.
Hope this helps Tim
|
|
|
10-01-2017, 07:16 AM
|
#8
|
Senior Member
Join Date: Feb 2014
Location: Dacula, Georgia
Posts: 1,283
|
They pop off. I had to replace 2. PITA. You have to fish the wires and just unscrew wire connector; reconnect new, finger tighten and all good. PITA IS IN GETTING A REPLACEMENT SENT TO YOU. FR is no longer using a specific distributor so he is about as cooperative as an encounter on a hiking trail with a rattlesnake while wearing shorts; sandals and a camera around your neck. I FINALLY got a replacement through FR. Nothing I could find on the internet was an exact match.
And I agree, BR reading lights are too bright.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|