Help!! Hot water heater shifted while driving.

[shernandez]

I just arrived to our destination, went out to turn the water heater on and it looks as if it has shifted. I can move it slightly, I attached a picture, just wondering if it just needs to tightened. Everything on the inside looks ok.


07 sunseeker 2940ds.
2012 Ford Fusion hybrid

[Mike968]

Could it be that the bezel came loose from the water heater? I just went out and looked at mine and there are 3 long screws that look to me like they secure the bezel to the water heater. One of mine, the top one, was way loose and flopping around. It's worth a look.

[shernandez]

I will take a look, it works fine, planning on messing with it on the way home.


07 sunseeker 2940ds.
2012 Ford Fusion hybrid

[Garrette]

Check for tightness and caulk around the access panel.


Sent from my iPad using Forest River Forums

[Eaglelover]

Usually the water heater sits on top of some kind of support to raise it up off the floor. Maybe a piece of wood or a small box structure. Look and see if there is any thing that shifted from under the heater. Frank

[The RB]

Mine did the same, I used wood shims to prop it back where it belonged ( from the inside, cause it's handy from behind the kitchen cabinets on my MH. ) I firmed it into place with some spray foam ( great stuff ). - it hasent moved for 7 months during travel.

[abjb]

Take a look at these threads from the Georgetown sub-forum.

http://www.forestriverforums.com/for...air-77764.html

This one has a good write-up with pictures.
http://www.forestriverforums.com/for...mod-21579.html

[Filthy Beast]

It's odd that the top came out. What did you find on this?