RVS Multiplexer

[Awilson]

I have a SunSeeker 2300 that has the RVS-770619NA camera system that has given me problems off and on and I asked for help on here last year. I got the help I needed in finding it. The problem is the camera on the right side does not always come on so I can see when it’s safe to pull back over. It works very sporadically by coming on like 10 times in a row then not working for 50! Frustrating! I have taken the unit out from under dash, reconnected all the wires, did a hard reset by disconnecting the power as instructed by the factory and when I got finished I checked for a signal and it is just as good as the left side.

I am hoping someone has run into this problem and found a solution cause I’m at my wits end. I have talked to the factory multiple times and keep getting the same answer, no signal. What to do?

[Kirk S]

I would try, for test purposes only, swapping the camera inputs. If it still happens when the right turn signal is activated I would rule out the camera and suspect the trigger signal or just a defective multiplexer. If the problem switches sides I would suspect the camera not providing a consistent signal.

I have a different, aftermarket, 2 input system on a pick-up truck that will not switch inputs if no signal from one of the cameras due to loss of power at the camera.
Good luck!

[Awilson]

Thanks for the input. I will try that in the near future when I get stopped.