Reply
 
Thread Tools Display Modes
Old 12-03-2014, 11:25 PM   #1
Junior Member
 
Join Date: Jun 2013
Posts: 7
Sunseeker quality control is nonexistent!

In April 2013 traded in our 2001 Jayco 26 ft motorhome for a brand spanking new 2013 31+ft Sunseeker with single slide. Had everything my wife and I and our aging cat needed and looked good to my eye.

Unfortunately, it was what I didn't see that day that has completely spoiled us on Forest River and the Sunseeker.

We are not casual users. We are also not beginners. We "live" in our motorhome 6-7 months a year and experience everything good and bad a motorhome brings to the table.

When you get beyond eye appeal our Sunseeker is a total, 100% disappointment. Absolutely no quality control on key operating systems.

Here are a few examples.

1. First trip out (last year) and 1500 miles from home we found ourselves facing a serious clogged double sink in the galley. (Had not washed a dish yet!) Tried everything from hot water to checking the roof vent etc. Even had an RV service, with ForestRiver permission, come to our site and work on the plumbing directly. They checked the traps etc and could find nothing wrong...however there was a definite ongoing "venting" issue that caused the slow water drainage out of either side of the kitchen sink. With FR permission they "cut pipe" at the suspect points pulling out the stove etc and working under the fridge. Snake would always find a blockage. Using a camera they found sawdust and other objects in the line in the rear part of the home where it connects to the gray tank. We were stuck...since we couldn't completely leave the home to have the plumbing completely redone! They helped the situation improve and we got through the season...draining slowly from the kitchen.

2. Also on the first trip...the carbon monoxide/propane detector malfunctioned daily and then died. In addition, all the clothes hangers in the bedroom fell off the ceiling of the wardrobes .....without anything hanging on them! There are a ton of other issues from drawers that are cockeyed to video cameras that refused to work...and assorted electrical gremlins.

3. Year two has been a repeat of year one with a host of other fit and finish type things. One in particular is so absurd that it actually made us laugh. Apparently our main coach TV had a pixel issue...so someone at FR got creative and painted the small spots on the screen with a magic marker.

I could go on but why bother. Paid a lot of money for the motorhome and would conclude it is worth considerably less. Would not recommend FR or a Sunseeker to anyone. Living with a bad decision...and have found the reason why some folks prefer paper plates.

Take care all!
__________________

__________________
bluesman46 is offline   Reply With Quote
Old 12-04-2014, 05:30 AM   #2
Senior Member
 
Witch Doctor's Avatar
 
Join Date: Feb 2012
Location: Clarksville Va.
Posts: 7,635
Sorry to hear of your quality control problems. After 3 years I still get saw dust in the strangest areas. That's what happen when you do piece work and have to push out certain # a day or they stay until they reach that #.
__________________

__________________
Rockwood #8289 WS 2012
F250 6.0 / Husky 16k
With 4 point leveling system
Witch Doctor is offline   Reply With Quote
Old 12-04-2014, 06:01 AM   #3
Senior Member
 
Join Date: Apr 2012
Location: South Carolina
Posts: 1,254
Sorry to hear of your problems, but some coaches have more problems than others. Quality control should make them more consistent.

Our Sunseeker 3100 was built August, 2010. We've used it over 350 nights and 33,000 miles. We've had only a few problems and fortunately all were minor. Most I just fixed myself rather than take it to the dealer, who is only 10 miles away and is very good to work with.
__________________
RamblerGuy
2011 Sunseeker 3100
1997 Pathfinder Toad
RamblerGuy is offline   Reply With Quote
Old 12-04-2014, 07:07 AM   #4
Senior Member
 
RSchleder's Avatar
 
Join Date: Apr 2014
Location: Iowa
Posts: 1,277
As a 20 year long Quality Director in the electronics industry, my opinion is that while "quality control" is definitely an issue in the RV industry, the more serious issue is LACK of "quality workmanship" by the individual workers on the production line. Quality cannot be inspected into a product. Worker ownership in doing their job right, the first time and everytime is, and always will be, the key to manufacturing a high quality product. And yes, I totally agree, it is Managements job to set the culture and the environment that encourages, and allows, each worker to meet this expectation. It's this process that allows the "quality control" team to VERIFY that the product is initially built to the quality standards and not put them in a position to try to inspect quality into the product. The RV plants I've toured simply do not have a quality system at all, therefore, we get what ever they produce and some are barely decent while others are simply junk!
__________________
Days camping (2016)----181 days
Days camping (2017) --- 82 days
2016 Wildcat MAXX 28RKX (33' TT), 2007 13' Scamp
2015 Ram Laramie Hemi, w/air suspension
30 years RV'ing
12 different RV's
RSchleder is offline   Reply With Quote
Old 12-04-2014, 09:48 AM   #5
Junior Member
 
Join Date: Jun 2013
Posts: 7
Good point on "quality workmanship" vs "quality control". I have, as I pointed out, experienced mind numbing examples. Under the fridge some one used scotch tape to tie off the electric connection. Anyone working on these things has to know when they are just going through the motions. Another good point on management's responsibility to set the culture to actually care about what someone is doing in the production process.
__________________
bluesman46 is offline   Reply With Quote
Old 12-04-2014, 10:25 AM   #6
Mddle of the Rd Extremist
 
MeepMeep's Avatar
 
Join Date: Feb 2014
Location: Jacksonville, FL
Posts: 540
Quote:
Originally Posted by RSchleder View Post
As a 20 year long Quality Director in the electronics industry, my opinion is that while "quality control" is definitely an issue in the RV industry, the more serious issue is LACK of "quality workmanship" by the individual workers on the production line. Quality cannot be inspected into a product. Worker ownership in doing their job right, the first time and everytime is, and always will be, the key to manufacturing a high quality product. And yes, I totally agree, it is Managements job to set the culture and the environment that encourages, and allows, each worker to meet this expectation. It's this process that allows the "quality control" team to VERIFY that the product is initially built to the quality standards and not put them in a position to try to inspect quality into the product. The RV plants I've toured simply do not have a quality system at all, therefore, we get what ever they produce and some are barely decent while others are simply junk!
X10! Unless the product is monitored throughout the production phase, there's no way that "quality control" can be added in at the end...calling a final inspection quality control is a fools errand. Having said that, our CC 38FL had a couple of minor issues after delivery which were taken care of promptly by our local dealership. There is no such thing as a perfect product..... It's the after sale service that is critical
__________________
Dan, Carolyn & The Bandit (1999-2015 RIP...)
MCPO (Retired)
United States Navy ('65 - '87)
2014 Cedar Creek 38FL
2013 RAM 3500 6.7L diesel DRW Crew Cab
"When you get to the fork in the road, take it....."
MeepMeep is offline   Reply With Quote
Old 12-04-2014, 11:31 AM   #7
Junior Member
 
Join Date: Jun 2013
Posts: 7
When a company demands and expects quality builds, stands behind that, rewards those who follow it, and then inspects continually....quality will show. Apparently FR doesn't do that. Must say however, that our old Jayco gave us very little trouble.

Meanwhile I have another clogged double kitchen sink issue to tend too (and no nothing but water and liquid soap has gone down the drain!)
__________________
bluesman46 is offline   Reply With Quote
Old 12-06-2014, 12:26 AM   #8
Senior Member
 
Join Date: Feb 2012
Posts: 956
I agree that the RV industry does not produce high quality units anywhere near that of the auto industry. However there is no foreign competition like what drove the auto industry. Also high quality usually means more cost. When I was shopping I found I could get a Sunseeker thousands less than a comparable Winny or Jayco so I expected I might have more need for rework.

If you can't or don't want to do your own repairs and reworks make sure you have a competent dealer and the checkbook, if not covered by warranty, to fix issues.
__________________
ATVer is offline   Reply With Quote
Old 12-06-2014, 07:46 AM   #9
Senior Member
 
RSchleder's Avatar
 
Join Date: Apr 2014
Location: Iowa
Posts: 1,277
Quote:
Originally Posted by ATVer View Post
I agree that the RV industry does not produce high quality units anywhere near that of the auto industry. However there is no foreign competition like what drove the auto industry. Also high quality usually means more cost. When I was shopping I found I could get a Sunseeker thousands less than a comparable Winny or Jayco so I expected I might have more need for rework.

If you can't or don't want to do your own repairs and reworks make sure you have a competent dealer and the checkbook, if not covered by warranty, to fix issues.
It actually takes very little extra time for a worker to do their job correctly vs incorrectly. When you consider the cost of factory rework and dealer warranty repairs, quality workmanship actually saves a company money as each process step is performed only once. Factory rework and dealer warranty work is expensive as not only does the rework require redoing the previous work, the previous work must be undone before the repair can even start.
I do agree that if higher quality components (parts) are used by any manufacturer then the finished item will cost more due to the increased
price of the parts. Sometimes, however, this can be a good trade off as the lower warranty costs can offset a major portion of these increased component costs.
And the final question----how do you put a price/cost on consumer dissatisfaction?
__________________
Days camping (2016)----181 days
Days camping (2017) --- 82 days
2016 Wildcat MAXX 28RKX (33' TT), 2007 13' Scamp
2015 Ram Laramie Hemi, w/air suspension
30 years RV'ing
12 different RV's
RSchleder is offline   Reply With Quote
Old 12-06-2014, 09:27 AM   #10
Senior Member
 
Join Date: Oct 2014
Location: Central Florida
Posts: 412
Quality control

I hope the Forester is assembled in a different plant.
__________________

__________________
poppytoymaker is online now   Reply With Quote
Reply

Tags
quality, sunseeker

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



» Virginia Campgrounds

Reviews provided by




ForestRiverForums.com is not in any way associated with Forest River, Inc. or its associated RV manufacturing divisions.


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 11:32 AM.