Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Display Modes
Old 12-09-2010, 07:55 PM   #1
Senior Member
 
Join Date: Dec 2010
Posts: 517
Send a message via Skype™ to scubieman
Back end of truck bouncing up and down while towing

I have a 30 foot travel trailer. I have stablizer bars and sway bars. Anyways when I hit certain areas of road my back end goes up and down real fast like the road is real ruff. Unsure if this could be because overweighted. Will it help to stiff suspension in or put more or less weight on rear end?
scubieman is offline   Reply With Quote
Old 12-09-2010, 08:15 PM   #2
Senior Member
 
M109Rrider's Avatar
 
Join Date: Oct 2010
Location: Chesapeake, Va
Posts: 938
Sounds like you need to adjust your WD. I'd try putting a little more weight on the rear wheels.
__________________
Jason and Billie
2018 F-250, 6.2L
2011 Prime Time Crusader 320RLT
"PT Crew Member Since 11/2010"
M109Rrider is offline   Reply With Quote
Old 12-09-2010, 08:17 PM   #3
Senior Member
 
Join Date: Dec 2010
Posts: 517
Send a message via Skype™ to scubieman
I will give it a try. Thank you. I'm trying to avoid spending more money on things besides camping things.
scubieman is offline   Reply With Quote
Old 12-09-2010, 08:28 PM   #4
Moderator Emeritus
 
Dave_Monica's Avatar
 
Join Date: Sep 2007
Location: Ontario, Canada
Posts: 4,327
May be worthwhile to take your set-up and weigh it at a CAT scales. You should get the front and rear axles weights of your TV and axles weight of the camper while hooked up, then re-weigh the TV front and rear axle weights. That will give you all the info you need...hitch weight, total camper weight, amount of weight transferred to the front axle of the TV.

You should be looking for 10 - 12% hitch weight of the total camper weight.

Dave
__________________


Nights camped in 2013 - 55, 2014 - 105, 2015 - 63
Dave_Monica is offline   Reply With Quote
Old 12-10-2010, 08:54 AM   #5
Moderator Emeritus
 
MtnGuy's Avatar
 
Join Date: Sep 2008
Location: Shenandoah Valley of Virginia
Posts: 9,280
Quote:
Originally Posted by Dave_Monica View Post
May be worthwhile to take your set-up and weigh it at a CAT scales. You should get the front and rear axles weights of your TV and axles weight of the camper while hooked up, then re-weigh the TV front and rear axle weights. That will give you all the info you need...hitch weight, total camper weight, amount of weight transferred to the front axle of the TV.

You should be looking for 10 - 12% hitch weight of the total camper weight.

Dave
This weigh-ins should determine if your WDH is setup correctly. I have mine set up to add about 40 lbs. to the front axle. That gets some added weight on the front axle, but still lets the rear axle carry most of the weight.

What is the tongue weight, and what is the rating of your spring bars ?? Too stiff or too light of bars can cause problems.
__________________

Chap , DW Joy, and Fur Baby Sango
2017 F350 Lariat CCSB, SRW, 4x4, 6.7 PS
2017 Grand Design Reflection 337RLS
MtnGuy is offline   Reply With Quote
Old 12-10-2010, 10:34 AM   #6
Moderator Emeritus
 
acadianbob's Avatar
 
Join Date: Mar 2008
Location: St. Paul, Minnesota
Posts: 3,369
Quote:
Originally Posted by M109Rrider View Post
Sounds like you need to adjust your WD. I'd try putting a little more weight on the rear wheels.
I would reach the opposite conclusion. Perhaps there is too much weight on the rear axle. I transferred a little more weight to my front axle to reduce bouncing at the rear.
__________________
https://i421.photobucket.com/albums/pp297/acadianbob/IMG_2757.jpg
2021 F350 Lariat 7.3 4X4 w 4.30s, 2018 Wildcat 29RLX
2012 BMW G650GS, Demco Premiere Slider
1969 John Deere 1020, 1940 Ford 9N, 1948 Ford 8N
Jonsered 535, Can of WD-40, Duct Tape
Red Green coffee mugs
acadianbob is offline   Reply With Quote
Old 12-10-2010, 10:51 AM   #7
Senior Member
 
M109Rrider's Avatar
 
Join Date: Oct 2010
Location: Chesapeake, Va
Posts: 938
When I first got my 6800lb Keystone TT I had this problem. The rear suspension on my 1500 dodge was too light so I adjusted the hitch for a lot of WD. The porposing was caused by too much rebound in the spring bars. Once I put more weight on the rear wheels it almost completely stopped.
__________________
Jason and Billie
2018 F-250, 6.2L
2011 Prime Time Crusader 320RLT
"PT Crew Member Since 11/2010"
M109Rrider is offline   Reply With Quote
Old 12-10-2010, 12:48 PM   #8
Senior Member
 
Join Date: Mar 2008
Location: Jacksonville Florida
Posts: 1,264
What year and/or mileage is on your tow vehicle? The factory shocks are not exactly the best choice for towing, and they last about as long as the factory warranty does, at least on my vehicles. I put a set of Bilstein gas shocks on my Ram, and it stopped the bouncing very well. I had 60k on it at that time, incidentally. Really helps the ride when not towing, too! Randy
__________________
/SIGPIC]'08 V-lite Flagstaff 30WRLS
'06 Ram 1500 QC hemi Reese dual cam sway control,
K&N series 77 intake, Hellwig helper spgs. LT tires,
Flowmaster "true duals", 380 h.p., Bilstein shocks
08flagvlite is offline   Reply With Quote
Old 12-10-2010, 01:46 PM   #9
Senior Member
 
Join Date: Dec 2010
Posts: 517
Send a message via Skype™ to scubieman
I have a 2005 gmc sierra with about 95,000 miles. I do remember leaving the dealership on some ice and my tires spun fairly easy ( by my opinion). I figured with about a extra 500 -1000 pounds sitting on my truck the task would of been harder

side note: only certain sections of road would do it not all the way home. I do have sometimes without towing with my truck or others vehicles sometimes they hope a bit if road is not done the best. But i will try to add more weight to rear end.

it was first tow so may need some adjusting to find my sweet spot.
scubieman is offline   Reply With Quote
Old 12-10-2010, 01:57 PM   #10
Moderator Emeritus
 
MtnGuy's Avatar
 
Join Date: Sep 2008
Location: Shenandoah Valley of Virginia
Posts: 9,280
Quote:
Originally Posted by scubieman View Post
side note: only certain sections of road would do it not all the way home. I do have sometimes without towing with my truck or others vehicles sometimes they hope a bit if road is not done the best. But i will try to add more weight to rear end.
I hope you realize that with the statement of adding more weight to the rear end of your GMC, the poster meant by your adjusting your WDH. And I am not sure if you need more or less back there....that is where the weigh-in at a CAT scale or the local rock quarry can give you the important figures.
__________________

Chap , DW Joy, and Fur Baby Sango
2017 F350 Lariat CCSB, SRW, 4x4, 6.7 PS
2017 Grand Design Reflection 337RLS
MtnGuy is offline   Reply With Quote
Old 12-10-2010, 01:59 PM   #11
Senior Member
 
Join Date: Dec 2010
Posts: 517
Send a message via Skype™ to scubieman
Okay, I will have to remember that. Right now it's well December and I live where we get snow so camping is not in my near furture

Thanks for the responses
scubieman is offline   Reply With Quote
Old 12-10-2010, 02:04 PM   #12
Senior Member
 
Join Date: Mar 2008
Location: Jacksonville Florida
Posts: 1,264
My 06 Dodge Ram 1500 pulling my 30 footer trailer bounced like crazy coming down a long bridge here in Fl. After replacing the shocks, it's not a problem anymore. That was at 60,000 miles. Shortbed, Quad cab Hemi. Randy
__________________
/SIGPIC]'08 V-lite Flagstaff 30WRLS
'06 Ram 1500 QC hemi Reese dual cam sway control,
K&N series 77 intake, Hellwig helper spgs. LT tires,
Flowmaster "true duals", 380 h.p., Bilstein shocks
08flagvlite is offline   Reply With Quote
Old 12-10-2010, 02:06 PM   #13
Senior Member
 
Join Date: Dec 2010
Posts: 517
Send a message via Skype™ to scubieman
How much are shocks? I guess I haven't really needed them?Well till now
scubieman is offline   Reply With Quote
Old 12-10-2010, 02:47 PM   #14
Senior Member
 
kz08h5's Avatar
 
Join Date: Apr 2009
Location: Carmel, Indiana
Posts: 309
Check Bilstiens out on the WEB. They are probably $100 to $150 for your truck.. I have a set on my Jeep Commander and they do make a difference. They are well worth the money.
__________________
kz08h5

2008 Chevy Silverado 2500 Duramax Crewcab
Jeep Commander - sold
Flagstaff V-Lite WRB26
kz08h5 is offline   Reply With Quote
Old 12-10-2010, 02:50 PM   #15
Senior Member
 
Join Date: Dec 2010
Posts: 517
Send a message via Skype™ to scubieman
Would it be possible springs are too weak? I know shocks should do something with the bouncing. But when I stand on the back of my truck it goes down a few inches.
scubieman is offline   Reply With Quote
Old 12-10-2010, 05:42 PM   #16
Site Team
 
bikendan's Avatar
 
Join Date: Jan 2007
Location: Goodyear, Arizona
Posts: 33,855
scubieman, you still haven't stated what engine and rear end ratio you have. this is important info that's needed to help you.

all you've said is that it's a 2005 gmc sierra. not whether it's a 6cyl., regular cab, short bed, and so forth. even cab style and bed length are important factors.
bikendan is online now   Reply With Quote
Old 12-10-2010, 05:46 PM   #17
Senior Member
 
Join Date: Dec 2010
Posts: 517
Send a message via Skype™ to scubieman
Quote:
Originally Posted by bikendan View Post
scubieman, you still haven't stated what engine and rear end ratio you have. this is important info that's needed to help you.

all you've said is that it's a 2005 gmc sierra. not whether it's a 6cyl., regular cab, short bed, and so forth. even cab style and bed length are important factors.
sorry Crew cab 5.3 liter v8. The gears I am uncertain. But just assuming are way to tell. I get about 17 to 19 MPG being nice to truck down road. I have dealership checking into prices for replacing gears to get me more power. After all I don't use 4th gear towing. I know some had said this is for OD. But if i go into tow/haul mode it will use 4th gear still.

Hope this answers must of what you need bikendan
scubieman is offline   Reply With Quote
Old 12-11-2010, 03:01 AM   #18
Site Team
 
bikendan's Avatar
 
Join Date: Jan 2007
Location: Goodyear, Arizona
Posts: 33,855
personally, i think a 30' TT is 3/4 ton land.

i have a '07 Avalanche with the 5.3 and a 3.73 rear end.
i tow a 23' HTT that weighs around 5000lbs. loaded and i wouldn't want to tow anything much bigger.

even a ultra lightweight 30' TT will weigh a lot.
bikendan is online now   Reply With Quote
Old 12-11-2010, 02:59 PM   #19
Senior Member
 
Join Date: Dec 2010
Posts: 517
Send a message via Skype™ to scubieman
Right now Im at 5500 dry. If I go short distance I am fine. If I go long distance I would be looking into a new truck. Maybe with tax season that will be my gift.
scubieman is offline   Reply With Quote
Old 12-11-2010, 03:50 PM   #20
Site Team
 
bikendan's Avatar
 
Join Date: Jan 2007
Location: Goodyear, Arizona
Posts: 33,855
Quote:
Originally Posted by scubieman View Post
Right now Im at 5500 dry. If I go short distance I am fine. If I go long distance I would be looking into a new truck. Maybe with tax season that will be my gift.
by "dry", do you mean the fictional brochure "dry" weight or the UVW from the factory "dry" weight?

by the way, what year and model trailer is it?
bikendan is online now   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Forest River, Inc. or any of its affiliates. This is an independent, unofficial site.



All times are GMT -5. The time now is 05:12 AM.